Staff Directory


Waleed Fekry Faris

Academic Qualification

  • Ph.D in Non-linear Dynamics - Doctor of Philosophy, Virginia Tech. University
  • Master in Applied Computational Mechanics - Masters Degree, Zagazig University
  • Bachelor in Mechanical Engineering - Bachelor Degree, Zagazig University

Waleed Fekry Faris (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


waleed@iium.edu.my
1207


Expert Profile


Professor Waleed Fekry Faris is a Professor in the Department of Mechanical Engineering, International Islamic University Malaysia (IIUM).
He got his BSc and MSc in Mechanical Engineering from Zagazig University, Egypt. His Ph.D in non-linear systems was from Virginia Tech, USA. Prof. Faris is a well-known internationally in the fields of dynamics and control and also in vehicle dynamics.
He is a reviewer for major international journals in the above fields, and a committee member in most of the well-established conferences in the above fields. He is on the editorial board for four international journals in automotive engineering and vibrations.
He has to his credit more than 120 journal papers, 85 conference papers, five books and many book chapters. Professor Faris has been advising many bodies within Malaysia and outside Malaysia as a consultant in engineering fields and in higher education policies as well.
He headed an international organization for quality assurance and accreditation under the Islamic Federation of Islamic Universities. Also, he is advising on management issues and published papers and books in the management fields, specifically quality assurance and strategic management.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Mechanical Control


Teaching Responsibilities


Additive Manufacturing 2023/2024
Advanced Computational Mathematics 2022/2023
AUTOMOTIVE INTEGRATED DESIGN 2021/2022
ISLAMIC PERSPECTIVE ON TECHNOLOGY & SOCIETY 2023/2024 2022/2023
ISLAMIC PERSPECTIVE ON TECHNOLOGY & SOCIETY (RESEARCH MODE) 2023/2024 2022/2023
MACHINE DESIGN 2023/2024
PROJECT I 2023/2024 2022/2023 2021/2022
VALUES, TECHNOLOGY AND SOCIETY 2022/2023 2021/2022


Supervision


Paramertric Thermal Analysis Of Plate-Fin Heat Sink Using Embossed Impressions.
Ph.D Completed 2018 Main Supervisor
Active Disturbance Rejection Control For Active Suspension System.
Ph.D Completed 2016 Main Supervisor
Analysis Of Circular Plate With Tunable Frequency .
Ph.D Completed 2015 Main Supervisor
Optimization And Control Of Semi-Active Suspension System For Off-Road Vehicles.
Ph.D Completed 2014 Main Supervisor
Analytical Modelling Of Fuel Consumption And Regulated Exhaust Emission Rates For Trucks.
Ph.D Completed 2014 Main Supervisor
A New Approach To Modeling And Simulation Of Automotive Industry In Support Of Performance And Control Analysis.
Ph.D Completed 2011 Main Supervisor
Investigation Of The Causes Of Chatter In Machine Tools And Development Of A New Chatter Model.
Ph.D Completed 2010 Co-supervisor
Performance Analysis Of The Numerical Model Of Wastewater Heat Recovery In Kuwait.
Ph.D In Progress Main Supervisor
Performance Analysis Of The Numerical Model Of Wastewater Heat Recovery In Kuwait.
Ph.D In Progress Main Supervisor
Islamic Values Of Transformational Leadership And Its Impact On Organizational Culture Change And Employee Performance: Case Of A Jordanian Company.
Ph.D In Progress Main Supervisor
Simulation Based Study Of Electric Vehicle Parameters.
Master Completed 2023 Main Supervisor
Effect Of Vehicle Ride On The Fatigue Life Of A Lower Arm Ball Joint.
Master Completed 2019 Co-supervisor
Fuzzy- Based Collision Avoidance System For Autonoumous Driving In Complicated Scenarios.
Master Completed 2018 Main Supervisor
Modeling And Analysis Of Fluid-Induced Vibration In Pipelines.
Master Completed 2018 Main Supervisor
Vehicle Occupant Accommodation Based On Nigerian Anthropometric Data.
Master Completed 2018 Co-supervisor
Modeling And Simulation Of A Non-Linear Friction Damper With Full Car Model.
Master Completed 2016 Co-supervisor
Design Of A Lookahead Controller In Heavy Duty Truck.
Master Completed 2015 Main Supervisor
Intelligent Control System For Active Suspension For Off-Road Vehicles.
Master Completed 2015 Main Supervisor
Modeling And Control Of Active Engine Mounts.
Master Completed 2014 Main Supervisor
Finite Element Analysis Of Drilling Bits Stresses In Oil And Gas Industry.
Master Completed 2014 Main Supervisor
Development Of Robust Hoo For Active Suspension Of H Car Model With Genetic Algorithm.
Master Completed 2014 Main Supervisor
Study Of Air Polution Emission By Moving Vehicle In Highly Polluted Area.
Master Completed 2014 Co-supervisor
Development Of An Efficient Electric Drive System For Elevator.
Master Completed 2013 Main Supervisor
Ride Quality Analysis Of Active Suspension Systems For Off-Road Vehicle.
Master Completed 2012 Main Supervisor
Investigation Of Heat Transfer Effect Of Nanoparticles On Pcr.
Master Completed 2012 Co-supervisor
The Structural Integrity Assessment Of A Partially-Filled-Tank During A Straight Line Sudden Brake Application Pertaining To Sloshing.
Master Completed 2012 Co-supervisor
Intelligent Controller For Flexible Manipulator.
Master Completed 2011 Main Supervisor
Intelligent Controller For Flexible Manipulator.
Master Completed 2011 Main Supervisor
An Ergonomic Concept Design Of A Motorbike With Prototyping.
Master Completed 2009 Main Supervisor
Dynamic And Control Policies Analysis Of Semi-Active Suspension System For Off-Rood Vehicle.
Master Completed 2009 Main Supervisor
Optimal Trajectory And Genetic Algorithm Based Energy Minimization For Robot Manipulators.
Master Completed 2007 Co-supervisor
Optimal Trajectory And Genetic Algorithm Based Energy Minimization For Robot Manipulators.
Master Completed 2007 Co-supervisor
Xenotransplantation: Medical And Islamic Perspectives.
Master In Progress Main Supervisor


Research Projects


Completed
2021 - Testing of Nanoparticle Lubricant - Graphene Based Engine Oil's Endurance Performance Study Using A Four Cylinder Gasoline Engine
2018 - 2021 Construction of Moral Values Education Course Module for Pre-Service Teachers
2017 - 2021 Constructing and Validating An Islamic Spiritual Enhancement Module For Mental Health In Psychology Stress ( International Institute of Islamic Thought (IIIT) )
2017 - 2019 Dynamic Modeling, Navigation and Control of Micro Aerial Vehicles
2012 - 2012 Problems Encountered by Scholarships Students on Scholarship Schemes in both the Islamic University Madinah (KSA) and International Islamic University Malaysia: A Comparative Study
2012 - 2016 Vibration Isolation Method using Variable Stiffness and Friction Damping
2011 - 2012 Systematic Study of University Quality System
2009 - 2011 An Investigation of the Mechanical Behaviour of MEMS-based Microswitch under Thermal and Electrostatic Loading including Cyrogenic Effect
2009 - 2011 Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV)
2009 - 2011 Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System
2009 - 2009 Machine Element Design for Engineers
2009 - 2013 Design and Development of the Mechanical System for Golleq
2009 - 2011 Modeling and Stimulation for Engineers
2008 - 2014 Humanized Industrial Design of a Handphone.
2008 - 2009 Intelligent Controller of Flexible Manipulator
2008 - 2012 Vibro-Acoustic Analysis of Automotive Vehicles
2007 - 2019 Study of Characteristics and Performance of Active Engine Mounting System Using Artificial Neural Network Based Controller
2007 - 2012 Simulation and Device Modeling of Poly-Si Thin Film Solar Cells
2007 - 2012 Total Vehicle Dynamics Analysis
2006 - 2011 Influence of Different Methods of Slaughtering on the Release and/or Retention of Neurotransmitter and Other Biomolecules at Neuromascular Junction
2005 - 2008 Modeling and Analysis of Fluid/Structure Interaction in Micropumps
2004 - 2007 Nonlinear Modeling and Analysis of Mems-Based Diaphragm Devices
On-Going
2023 - Present The Essence of The Conference of The Rulers and Its Legal Implication to The Malaysian Constitutional System
2022 - Present Introduction to Futures Studies
2022 - Present TEACHING MATERIALS PROJECT:- ENGINEERS AND THE SOCIETY
2021 - Present The Effect of Recurrent Pedal Pressings and Sitting Posture on the Driver's Fatigue During Road Traffic Delay via System Identification Models and Deep Learning Techniques
2014 - Present Pembangunan Pelaksanaan Indeks Syariah Dalam Pentadbiran Negara
2012 - Present The Development of a Vibration Isolation Prototype with Adaptable Stiffness and Damping Coefficient
2009 - Present An Investigate Analysis of the Use of Road Topography Data to Enhance Truck Performance along Roadways


Publications


Article

2023 الفقه والمقاصد والأخلاق: قراءة في التراث الإسلامي والحوار المعاصر = Fiqh, maqasid and ethics: a reading in Islamic heritage and contemporary dialogue. At-Tajdid, 27 (54) pp. 329-346
2021 A review of Kahlil Gibran’s major creative works. Journal of Islam in Asia, 18 (3) pp. 1-23
2021 Jalāl al-Dīn al-Rūmī’s concept of Ibtilā’: its application to stress management. Al-Itqan, 5 (1) pp. 5-18
2020 Development of vibration damper to reduce generated stress due to flow induced vibrations in pipeline. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3) pp. 11657-11668
2020 Fatigue life study of suspension ball joints on the basis of ride quality. International Journal of Vehicle Noise and Vibration, 16 (1/2) pp. 69-84
2020 Modeling and analysis of wastewater heat recovery system in Kuwait. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3) pp. 7895-7910
2020 Stress alleviation – benefitting from the twenty-fifth flash of Saʿīd Nursī’s Lem’alar. Al-Itqan, (Special Issue No. 2) pp. 31-55
2019 An improved narrowband active noise control system without secondary path modelling based on the time domain. International Journal of Vehicle Noise and Vibration, 15 (2-3) pp. 110-132
2019 Analysis of active suspension control policies for vehicle using robust controllers. International Journal of Advanced Science and Technology, 28 (16) pp. 836-855
2019 Computational validation of magnetorheological elastomers for engine mount application. International Journal of Recent Technology and Engineering, 7 (6S) pp. 180-184
2019 Control of using robust H∞ control with genetic algorithm. International Journal of Advanced Science and Technology, 28 (16) pp. 763-782
2019 Optimization of robust and LQR control parameters for half car model using genetic algorithm. International Journal of Advanced Science and Technology, 28 (16) pp. 792-811
2019 Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems, 26 (2) pp. 188-224
2018 All-pass filtered x least mean square algorithm for narrowband active noise control. Applied Acoustics, 142 () pp. 1-10
2018 Automotive seat fit parameters based on representative Nigerian anthropometric data. Malaysian Journal of Public Health Medicine, 18 (Special Issue 2) pp. 32-40
2018 Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)) pp. 81-85
2018 Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering, 5 (Specialissue 4) pp. 68-88
2017 The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah, 22 (1) pp. 29-64
2017 Validated analytical modelling of supercharging centrifugal compressors with vaneless diffusers for H2-biodiesel dual-fuel engines with cooled EGR. International Journal of Hydrogen Energy, 42 (43) pp. 26771-26786
2016 A mixed control system for active suspension for off-road vehicles. International Journal of Vehicle Noise and Vibration, 12 (2) pp. 101-137
2016 Characterization of magnetorheological elastomer (MRE) engine mounts. Materials Today: Proceedings, 3 (2) pp. 411-418
2016 Experimentally validated analytical modeling of diesel engine power and in-cylinder gas speed dynamics. Journal of Mechanical Science and Technology, 30 (10) pp. 4725-4734
2016 Fuel efficient intelligent control of heavy trucks. ARPN Journal of Engineering and Applied Sciences, 11 (6) pp. 4164-4171
2016 The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1) pp. 77-87
2016 Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6) pp. 1-4
2016 Validated analytical modeling of diesel engine regulated exhaust CO emission rate. Advances in Mechanical Engineering, 8 (6) pp. 1-15
2015 Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4) pp. 199-209
2015 Dynamic characterization of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3/4) pp. 199-209
2015 Evaluation of elastomeric models for engine mountings applications . International Journal of Vehicle Noise and Vibration, 11 (3/4) pp. 210-224
2015 Ride comfort performance of a vehicle using active suspension system with active disturbance rejection control . International Journal of Vehicle Noise and Vibration, 11 (1) pp. 78-101
2014 A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS), 21 (1) pp. 26-41
2014 Dynamic characterisation of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471 () pp. 89-96
2014 Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471 () pp. 89-96
2014 Experimentally validated analytical modeling of diesel exhaust HC emission rate. Journal of Mechanical Science and Technology, 28 (10) pp. 4139-4149
2014 Impact of intelligent transportation systems on vehicle fuel consumption and emission modeling: an overview. SAE International Journal of Materials and Manufacturing, 7 (1) pp. 129-146
2014 Optimisation and control of semi-active suspension using genetic algorithm for off-road full vehicle. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4) pp. 372-382
2014 Scientific research dilemma in contemporary Muslim world. International Journal of Muslim Unity, 12 (1&2) pp. 1-12
2014 Supercharged diesel powertrain intake manifold analytical model. International Journal of Vehicle Systems Modelling and Testing, 9 (1) pp. 1-35
2013 Air pollution study of vehicles emission in high volume traffic: Selangor, Malaysia as a case study. WSEAS Transactions on Systems , 12 (2) pp. 67-84
2013 Digital implementation of space vector pulse width modulation technique using 8-bit microcontroller . World Applied Sciences Journal, 21 (1) pp. 21-28
2012 "وسائل التربية فى رسائل النور "رؤية في توحيد المفاهيم . International Journal of Muslim Unity, 10 (1-2) pp. 47-83
2012 Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate. International Journal of Vehicle Noise and Vibration, 8 (4) pp. 302-317
2012 Comparative analysis of LQR and robust controller for active suspension. International Journal of Vehicle Noise and Vibration, 8 (4) pp. 367-386
2012 Contact-impact problems using a quasi-linear finite element appraoch. Australian Journal of Basic and Applied Sciences, 6 (1) pp. 17-21
2012 Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences, 6 (1) pp. 17-21
2012 Enhancing the efficiency of polymerase chain reaction using graphene nanoflakes. Nanotechnology, 23 (45) pp. 1-8
2012 Investigation of the perfomance of a rotor-bearing systems containig composite and non-composite squeeze film dampers. Materials and Design, 34 () pp. 340-345
2012 Micropump modeling: current status and challenges. Australian Journal of Basic and Applied Sciences, 6 (1) pp. 134-142
2012 Vibration investigation of a quarter car with nonlinear shock absorber model. Advanced Materials Research, 576 () pp. 665-668
2012 مقابلة مع الدكتور عبد العزيز التويجري: الأمين العام للمنظمة الإسلامية للتربية والعلوم والثقافة (الإيسيسكو . International Journal of Muslim Unity, 10 (1-2) pp. 83-95
2011 A new concept design of a motorbike with 3D model for the Malaysian market. Journal of Design Research, 9 (1) pp. 16-43
2011 A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration, 7 (3) pp. 271-284
2011 Active engine mounting controller design using linear quadratic regulator and proportional integral derivative . International Journal of Automation and Control , 5 (3) pp. 284-297
2011 Air supply system transient model for proton exchange membrane fuel cell . International Journal of Vehicle systems Modelling and Testing, 6 (3/4) pp. 396-407
2011 Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4) pp. 219-231
2011 Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research, 264-26 () pp. 1174-1179
2011 Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V. Journal of Manufacturing Science and Engineering, 133 (1) pp. 011013-1
2011 Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85 () pp. 392-395
2011 Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6) pp. 456-460
2011 Review on solution methods for random vibration problems. Australian Journal of Basic and Applied Sciences, 5 (6) pp. 355-359
2011 Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65 () pp. 1160-1165
2011 The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4) pp. 307-317
2011 Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4) pp. 318-392
2011 Vibrational characteristics of piping system in air conditioning outdoor unit . Science China Technological Sciences, 54 (5) pp. 1154-1168
2011 Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5) pp. 1154-1168
2011 Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85 () pp. 557-561
2010 A critical evaluation on the effectiveness of ISO 9001:2000 (QMS) implementation in Malaysian and Saudi manufacturing companies. International Journal of Arab Culture, Management and Sustainable Development, 1 (3) pp. 302-324
2010 A study of annular plate buckling problem with tension loaded at inner edge. Analele Universitatii 'Eftimie Murgu', 17 (1) pp. 97-103
2010 Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1) pp. 59-71
2010 Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1) pp. 59-71
2010 An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2/3/4) pp. 200-214
2010 An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2-4) pp. 200-214
2010 Assessment of different semi-active control strategies on the performance of off-road vehicle suspension systems. International Journal of Vehicle Systems Modelling and Testing , 5 (2-3) pp. 254-271
2010 Development of a mathematical model for the prediction of chip formation instability and its verification by fuzzy logic with genetic algorithm. International Journal of Machining and Machinability of Materials (IJMMM), 8 (1/2) pp. 38-54
2010 Dynamic characterisation of elastomeric engine mounts of different geometry used in automotive industry: simulation approach. International Journal of Vehicle Noise and Vibration, 6 (1) pp. 1-39
2010 Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1) pp. 193-200
2010 Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1) pp. 193-200
2010 Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research, 83-86 () pp. 637-645
2010 Modelling manufacturing process using a modified IDEF0 framework a case study of a car door manufacturing plant. International Journal of Engineering Systems Modelling and Simulation, 2 (4) pp. 234-241
2010 Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research, 97-101 () pp. 1989-1992
2010 Teaching engineering ethics: a necessary measure for engineering capacity building in Arab countries. International Journal of Arab Culture, Management and Sustainable Development, 1 (4) pp. 318-325
2010 The teaching of ethics at KOE, IIUM. Eubios Journal of Asian and International Bioethics, 20 (6 SupB) pp. 256
2009 A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2) pp. 116-140
2009 A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2) pp. 116-140
2009 Active engine mounting control algorithm using neural network . Shock and Vibration, 16 () pp. 417-437
2009 Analysis of semi-active suspension systems for four-axles off-road vehicle using half model. International Journal of Vehicle Noise and Vibration, 5 (1/2) pp. 91-115
2009 Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration, 5 (1/2) pp. 91-115
2009 Artificial neural network chip serration frequency model in end milling of medium carbon steel. Research Journal of Applied Sciences, 4 (3) pp. 108-112
2009 Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4) pp. 231-241
2009 Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration, 2009 (508076) pp. 1-10
2009 Energy minimization approach for a two-link flexible manipulator . Journal of Vibration and Control, 15 (4) pp. 497-526
2009 Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design, 30 () pp. 3206-3216
2009 Investigation into noise problems in vehicle structure using vibro-acoustic approach. International Journal of Vehicle Noise and Vibration, 5 (3) pp. 238-260
2009 Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1 () pp. 89-96
2009 Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2) pp. 95-103
2009 Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration, 16 () pp. 593-605
2009 Technology transfer: challenges and prospective Arab world as a case study. International Journal of Arab Culture, Management and Sustainable Development, 1 (2) pp. 195-207
2009 Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control, 6 (1) pp. 62-71
2008 Active engine mounting controller using extended minimal resource allocating networks . International Journal of Vehicle Noise and Vibration, 4 (2) pp. 150-168
2008 Analysis of control policies and dynamic response of a Q-car 2-DOF semi active system . Shock and Vibration, 15 (5) pp. 573-582
2008 Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel. Journal of Engineering, 6 (3) pp. 171-178
2008 Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology, () pp. 1-17
2007 Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration, 3 (4) pp. 370-405
2006 An experimental study on steel and Teflon squeeze film dampers . Shock and Vibration, 13 (1) pp. 33-40
2006 Image processing for chatter identification in machining processes. International Journal of Advanced Manufacturing Technology, 31 () pp. 443-449
Conference or Workshop Item

2020 Exploring the effectiveness of the Islamic Spiritual Enhancement Module (ISEM) in reducing stress among university students.. In: Scholarship Advancement Project Seminar 2020,
2019 Aerodynamics of a circular planform wing. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018),
2019 Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018),
2019 Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018),
2018 Simulation of disturbance rejection control of half-car active suspension system using ADRC with decoupling transformation. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17),
2017 An investigation into NVC characteristics of vehicle behaviour using modal analysis. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2016 Internal determinants of Waqaf in non-Muslim countries . In: Fifth International Journal of Awqaf 2016,
2011 Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Design of robust Hoo, fuzzy and LQR controller for active suspension of a quarter car model. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11,
2011 Enhancement of polymerase chain reaction using graphene nano-flakes. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011),
2011 The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2010 A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model . In: 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010,
2010 A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010,
2010 An investigation of the mechanical behavior of a microswitch beam under thermal and electrostatic loading including cryogenic effect . In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010),
2010 Artificial nose for alcohol detection. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2009 Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009),
2009 Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration,
2009 Ride comfort assessment in off road vehicles using passive and semi-active suspension. In: Asia pacific Conference on Defence & Security Technology (DSTC 2009),
2009 Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009),
2009 Technology transfer: Challenges and prospective Arab world as a case study. In: International Engineering Education Conference (IEEC 2009),
2008 A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education,
2008 An assessment of semi-active suspension for passenger cars using full-car model. In: The 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME),
2008 Analysis of semiactive suspension systems using half-car model. In: FISITA 2008 World Automotive Congress,
2008 Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020 . In: Malaysian Metallurgical Conference, MMC 2008,
2008 Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008),
2008 Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008,
2008 Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008),
2008 Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference,
2008 Semi-active suspension system for off-road vehicles. In: 3rd International Conference on Mechatronics, ICOM’08,
2007 Analysis of quarter-car 2 degree-of-freedom semiactive systems. In: IASTED Asian Conference on Modelling and Simulation,
2007 Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07),
2007 Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007,
2005 Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003,
2004 A comparison between two solution approaches for diaphragm-based capacitive pressure microsensor. In: 2004 IEEE International Conference on Semiconductor Electronics,
2002 Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
Book

2022 Regorounding Maqasid al-Shariah" the Qur'anic semantics and foundation of human common good. Islamic Book Trust, IBT and International Institute for Muslim Unity, IIMU, IIUM, ISBN: 978-967-0526-97-3
2022 Regrounding maqasid al-shari'ah: the Qur'anic semantics and foundation of human common good. Islamic Book Trust, ISBN: 978-967-0526-97-3
2021 A manual of spiritual therapy: Islamic perspective. International institute of Muslim Unity, IIUM, ISBN: 978-967-25504-0-2
2021 Spiritual therapy : an islamic perspective. International Institute for Muslim Unity (IIMU) Islamic Book Trust International Institute for Muslim Unity, ISBN: 9789670526942
2017 Muslim women’s contributions to society. Centre for Muslims World Affairs, ISBN: 978 –967 –2041–10– 8
2016 al-Tarbiyah wa-al-murabbi al-qira'ah fi hayah Sa'id al-Nursi wa-Rasa'il al-Nur. |bal-Jami'ah al-Islamiyah al-'Alamiyah,|c2016, ISBN: 9789839470970
2011 Contributions of early muslim scientists to engineering sciences and related studies. IIUM Press, ISBN: 978-967-418-157-4
2011 Introduction to machine element design for engineers. IIUM Press, ISBN: 9789675272936
2011 Islamization, ethics and values in science and technology. IIUM Press, ISBN: 978-967-022-582-1
2009 A first course in control systems. IIUM Press, ISBN: 9789833855650
2009 Fundamentals of fluid mechanics. IIUM Press, ISBN: 9789833855889
2006 Islamic engineering ethics: foundation integration and practice. Future Text Publications, ISBN: 9833004660
2000 Automotive styling methodologies: lecture notes. Self-published, ISBN:
Book Section

2022 Sustainable development goals (SDGs) and the leadership of Prophet Muhammad (SAW). In: International Institute for Muslim Unity (IIMU) and the Center for Islamisation (CENTRIS), International Islamic University Malaysia (IIUM), ISBN: 978-967-25504-1-9, pp. 174-203
2022 Sustainable development goals (SDGs) and the leadership of Prophet Muhammad (SAW). In: International Institute for Muslim Unity (IIMU) and the Center for Islamisation (CENTRIS), International Islamic University Malaysia (IIUM), ISBN: 978-967-25504-1-9, pp. 174-203
2019 The Kulliyyah of Architecture and Environmental Design: building on rich heritage. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 279-287
2019 The Kulliyyah of Engineering: producing Muslim engineers. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 289-303
2019 The Kulliyyah of Engineering: producing Muslim engineers. In: IIUM Press, ISBN: 978-967-491-035-8, pp. 289-303
2013 Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM Press, ISBN: 9789674182700, pp. 239-249
2013 Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM Press, ISBN: 9789674182700, pp. 239-249
2011 Al-Majusi: the pioner in obstetrics. In: IIUM Press, ISBN: , pp. 7-11
2011 Design and implementation of fuzzy control for two link flexible manipulator. In: IIUM Press, ISBN: 9789670225685, pp. 209-214
2011 Design and production of carbon nanotube-based biosensor . In: IIUM Press, ISBN: 9789674181369, pp. 130-137
2011 E-waste : problems, Islamic perspective and solutions. In: IIUM Press, ISBN: 9789670225821, pp. 112-124
2011 Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 115-120
2011 Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 115-120
2011 Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: IIUM Press, ISBN: 9789670225685, pp. 591-596
2011 Muslim contributions to physics. In: IIUM Press, ISBN: 9789670225821, pp. 100-110
2011 Nasir al-Din al-Tusi's understanding of trigonometry. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 58-64
2011 Neural network controlled of an active engine mounting system using a nonlinear electromagnetic. In: IIUM Press, ISBN: 9789670225685, pp. 194-202
2011 Semi-active suspension system for off-road vehicles. In: IIUM Press, ISBN: 9789670225685, pp. 119-128
2011 The contribution of Ibn al-Awwam in botany and agriculture. In: IIUM Press, ISBN: 978-967-418-4, pp. 41-44
2011 The nano world of Munir Nahfey. In: IIUM Press, ISBN: 978-967-418-157-4, pp. 127-134
2011 Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: IIUM Press, ISBN: 9789670225821, pp. 46-54
2011 Use and abuse of technology : Internet as a case study. In: IIUM Press, ISBN: 978-967-0225-82-1, pp. 143-156
2009 Nonlinear modeling and analysis of mems-based diaphragm devices. In: IIUM Press, ISBN: 9789833855780, pp. 360-371
2006 Ethical challenges of informatin technology : an Islamic perspective. In: Future Text Publications, ISBN: 983-3004-66-0, pp. 81-89
2006 Muslim scientists and world civilizations. In: Future Text Publications, ISBN: 983-3004-66-0, pp. 18-26
Monograph

2021 Construction of moral values education course module for pre-services teachers. In: IIUM Press,
2012 Vibro-Acoustic Analysis of Automotive Vehicles. In: s.n,