Article |
2020 |
The relation of compression strength with modulus of rupture and UPV of concrete containing M sand as fine aggregate. Advances in Science, Technology and Engineering Systems Journal (ASTESJ)
, 5
(5)
pp.39-46
|
2020 |
3D geospatial technique in analysing the Malay heritage building structures. Planning Malaysia
, 18
(2)
pp.85-96
|
2020 |
The attributes of ‘Papan Meleh’ - roof eaves decoration in Baitul Rahmah (Kuala Kangsar, Perak, Malaysia) with the historic building information modelling (HBIM) application. Planning Malaysia
, 18
(2)
pp.181-192
|
2020 |
The impact of manufactured sand (M-Sand) as partially and fully replacement of fine aggregate in concrete. Advances in Science, Technology and Engineering Systems Journal
, 5
(1)
pp.302-306
|
2020 |
The attributes of 'Papan Meleh'-roof eaves decoration in Baitul Rahmah (Kuala Kangsar, Perak, Malaysia) with the historic building information modelling (HBIM) application. Planning Malaysia
, 18
(2)
pp.181-192
|
2020 |
The recycled polyethylene terephthalate (PET) bottles waste as a fine aggregate replacement in concrete. TEST Engineering & Management magazine
, 83
(May-June 2020)
pp.1093-1096
|
2020 |
Recreating historical Malay architecture with BIM
process. International Journal of Built Environment and Sustainability
, 7
(2)
pp.79-89
|
2020 |
A generic process of documentation and data management for historical Malay architecture using BIM. Planning Malaysia Journal of the Malaysian Institute of Planners
, 18
(2)
pp.73-84
|
2019 |
The three layerings of Malay aristocratic ornamentations:
survival of semantic categories amidst stylistic changes. JOURNAL OF BUILT ENVIRONMENT, TECHNOLOGY AND ENGINEERING
, 6
pp.1-12
|
2019 |
Spatial analysis on Malay buildings for categorization of Malay historic BIM library. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies
, 11
(2)
pp.1-17
|
2019 |
Polyethylene Terehthalate (PET) bottles waste as fine aggregate in concrete. International Journal of Innovative Technology and Exploring Engineering (IJITEE)
, 8
(6S4)
pp.1177-1180
|
2019 |
BIM backed decision support system in the management of heritage building. International Journal of Built Environment and Sustainability
, 6
(2)
pp.71-79
|
2018 |
Historic Building Information Modelling (HBIM) for Malaysian construction industry. Planning Malaysia: Journal of the Malaysian Institute of Planners
, 16
(3)
pp.332-343
|
2018 |
Analysis by means of surface response to chemical composition and pozzolanic reactivity of ultrafine treated rice husk ash (UFTRHA) as cementing additive material. International Journal of Engineering and Technology(UAE)
, 7
(4)
pp.342-346
|
2018 |
Heritage building preservation through building information modelling: reviving cultural values through level of development exploration. Planning Malaysia Journal of the Malaysian Institute of Planners
, 16
(2)
pp.62 -72
|
2018 |
Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete. Planning Malaysia : Journal of the Malaysian Institute of Planners
, 16
(2)
pp.285-292
|
2018 |
Exploring the influence of architectural elements of Balai Besar Kedah on the Malay traditional architecture. e-Bangi
, 16
(8)
pp.1-15
|
2018 |
Heritage building preservation through building information modelling: reviving cultural values through level of development exploration. Journal of the Malaysian Institute of Planners
, 16
(2)
pp.62-72
|
2018 |
Heritage building preservation through building information modellling: reviving cultural values through level of development exploration. Planning Malaysia Journal of the Malaysian Institute of Planners
, 16
(2)
pp.62-72
|
2017 |
Indoor mould growth prediction using coupled computational fluid dynamics and mould growth model. Building Simulation
, 10
(4)
pp.551-562
|
2017 |
Life cycle cost and performance assessment: comparison between reconstruction and cold-in-place recycling (CIPR) methods. Malaysian Construction Research Journal (MCRJ)
, 21
(1)
pp.17-32
|
2017 |
CFD investigation of indoor hygrothermal and airflow profile in academic research storage room: effect of lma on thermohygric balance and mould growth. ARPN Journal of Engineering and Applied Sciences
, 12
(10)
pp.3080-3087
|
2017 |
Exploring methods of quantity measurement for heritage conservation works. Advanced Science Letters
, 23
(7)
pp.6277-6280
|
2017 |
CFD investigation of indoor hygrothermal performance in academic research storage room: Measurement and validation. ARPN Journal of Engineering and Applied Sciences
, 12
(10)
pp.3130-3136
|
2016 |
Effect of pretreatment soaking duration to characteristic of ultrafine treated rice husk ash (UFTRHA) as supplementary cementing material (SCM)
. ARPN Journal of Engineering and Applied Sciences
, 11
(12)
pp.7596-7600
|
2016 |
Hygrothermal performance of building envelopes in the tropics under operative conditions: condensation and mould growth risk appraisal . Jurnal Teknologi
, 78
(5)
pp.271-279
|
2015 |
Effect of rice husk ash (RHA) on physical property and mechanical strength of concrete
. Advanced Materials Research
, 1115
pp.150-155
|
2015 |
Physical and mechanical properties of concrete incorporating manufactured sand. Advanced Materials Research
, 1115
pp.160-165
|
2015 |
Effect of tropical climate condition to compressive strength and microstructure properties of high performance fiber reinforced reinforced concrete (HPFRC). Advanced Materials Research
, 1115
pp.182-187
|
2015 |
Mechanical Properties of Bamboo Fibre Composite Incorporating Pulverized Fuel Ash. Advanced Materials Research
, 1115
pp.270-274
|
2015 |
Characterization, microstructure properties and impurities removal of treated rice
husk ash (TRHA) as supplementary cementing material (SCM) in concrete using hydrochloric acid pretreatment process. Journal of Applied Science and Agriculture
, 10
(3)
pp.1-4
|
2015 |
Effect of calcium carbonate replacement on workability and mechanical strength of Portland cement concrete
. Advanced Materials Research
, 1115
pp.137-141
|
2015 |
Effect of polycarboxylate ether (PCE) addition to physical and mechanical characteristics of high performance concrete . Advanced Materials Research
, 1115
pp.146-149
|
2015 |
Pozzolanic reaction mechanism of rice husk ash in concrete – a review. Applied Mechanics and Materials
, 773-774
pp.1143-1147
|
2012 |
Optimization of a cooling system in data centers. Wulfenia Journal
, 19
(9)
pp.196-214
|
2012 |
Construction quality of school buildings using the Industrialised Building System (IBS). Malaysian Construction Research Journal
, 11
(2)
pp.21-35
|
2010 |
A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya. International Journal of Human and Social Sciences
, 5
(2)
pp.117-121
|
2009 |
A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya. World Academy of Science, Engineering and Technology
, 53
pp.694-698
|
2009 |
Assessment of mould growth on building materials using spatial and frequency domain analysis techniques. International Journal of Computer Science and Network Security (IJCSNS)
, 9
(7)
pp.154-167
|
2009 |
Audit assessment of the facilities maintenance management
in a public hospital in Malaysia. Journal of Facilities Management
, 7
(2)
pp.142 -158
|
2007 |
Protection of natural Wetland within development area: a case study of Tasik Melati. International Journal of Energy and Environment
, 1
(2)
pp.122-126
|
2007 |
Impact of Wetland urbanization in Kuala Lumpur, Malaysia. International Journal of Energy and Environment
, 1
(2)
pp.127-132
|
1999 |
Effect of fatigue loading on bonding shear strength at the interface between two layers concrete. Journal of Structural Engineering
, 45A
pp.1157--1164
|
Conference or Workshop Item |
2020 |
Correlation between slump, VeBe and compaction factor of concrete containing shredded PET bottles, manufactured sand (M-sand) and river sand as fine aggregate.
In: 5th International Conference on Advanced Technology and Applied Sciences and 6th Malaysia Japan Joint International Conference (ICETAS MJJIC 2020)
|
2019 |
The application of CAP-SASW method in determination of sub-surface profile of flexible taxiway in the airport.
In: 10th Malaysian Road Conference & Exhibition 2018
|
2019 |
The three layerings of Malay Aristocratic ornamentations:
survival of semantic categories amidst stylistic changes.
In: The 6th Putrajaya International Built Environment, Technology and Engineering Conference (PIBEC 6) 2019
|
2019 |
Spatial analysis on Malay buildings for categorization of Malay historic BIM library.
In: 4th International Conference-Workshop on Sustainable Architecture and Urban Design (ICWSAUD) 2019
|
2019 |
The effect of recycled Polyethylene Terephthalate (PET) bottles waste as a fine aggregate replacement in concrete.
In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2019
|
2019 |
Polyethylene Terephthalate (PET) bottles waste as fine aggregate in concrete - a review.
In: International Conference on Sustainable Urban Development Resource Conservation and Food Security
|
2019 |
A customized classification with codification of Malay architectural heritage:the Malay Palatial facades.
In: Innovation And Technology Exposition InTEX19
|
2018 |
Analysis by means of surface response to chemical composition and pozzolanic reactivity of Ultrafine Treated Rice Husk Ash (UFTRHA) as cementing additive material.
In: International Graduate Conference on Energy, Engineering & Technology 2018 (iGRAD2018)
|
2018 |
Traditional Malay building as-built drawings reproduction
using building information modelling.
In: ASEAN Postgraduate Conference 2018
|
2018 |
Compositional-cultural evolutions as variations of Malay architectural and constructional vocabulary- a review.
In: International Conference on Language, Culture and Society 2018 (2018)
|
2016 |
Moisture condensation on building envelopes in differential ventilated spaces in the tropics: quantitative assessment of influencing factors.
In: The 4th International Building Control Conference 2016 (IBCC 2016)
|
2016 |
Experimental investigation of ventilation efficiency in a dentistry surgical room.
In: The 4th International Building Control Conference 2016 (IBCC 2016)
|
2016 |
The effect of incineration temperature to the chemical and physical properties of Ultrafine Treated Rice Husk Ash (UFTRHA) as Supplementary Cementing Material (SCM).
In: The 4th International Conference on Process Engineering and Advanced Materials (ICPEAM 2016)
|
2016 |
Milling time influence of ultrafine treated rice husk ash to
pozzolanic reactivity in portlandite.
In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016; Kuala Lumpur; Malaysia
|
2016 |
Exploring methods of quantity measurement for heritage conservation works.
In: International Conference on Architecture & Built Environment (ICABE 2016)
|
2016 |
Evoking Malaysian architecture cultural identity through development of parametric bim.
In: 16th International Conference on Construction Applications of Virtual Reality
|
2015 |
CFD investigation of indoor hygrothermal performance in academic research storage room: measurement and validation.
In: International Conference on Computational Fluid Dynamics in Research and Industry 2015
|
2015 |
Ventilation performance assessment of an educational building in a hot and humid climate.
In: International Civil and Infrastructure Engineering Conference 2014
|
2015 |
Comparative study of life cycle cost and pavement performance on road rehabilitation methods.
In: 14th Management in Construction Research's Association (MiCRA) Annual Conference and General Meeting
|
2015 |
Indoor microbial growth prediction using coupled computational fluid dynamics and microbial growth models.
In: The 13th Asia Pacific Conference on the Built Environment
|
2015 |
Hygrothermal performance of building envelopes in the tropics under operative conditions: condensation and mould growth risk appraisal.
In: International Conference On Science, Engineering, Built Environment And Social Science (ICSEBS 2015)
|
2015 |
An improved method to evaluate indoor microclimatic data: case study of a book archive in a hot and humid climate.
In: The 13th International Conference on Indoor Air Quality and Climate
|
2014 |
An improved method to evaluate indoor microclimatic data: case study of a book archive in a hot and humid climate.
In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014)
|
2014 |
Effect of tropical climate condition to compressive strength and microstructure properties of High Performance Fiber Reinforced Concrete (HPFRC).
In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
|
2014 |
Influence of indoor microclimate distribution on mould infestation in a university library.
In: International Civil and Infrastructure Engineering Conference (InCIEC2014)
|
2014 |
Effect of calcium carbonate replacement on workability and mechanical strength of portland cement concrete.
In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) 23-25 September 2014, Kuala Lumpur, Malaysia
|
2014 |
Effect of rice husk ash (RHA) on physical property and mechanical strength of concrete.
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
|
2014 |
Mechanical properties of bamboo fibre composite incorporating pulverized fuel ash.
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
|
2014 |
Evaluating life cycle cost and performance comparison between cold in place recycling and reconstruction method.
In: Management Construction Researchers' Association Annual Conference and General Meeting (MiCRA 2014)
|
2014 |
Pozzolanic reaction mechanism of rice husk ash in concrete: a review.
In: International Integrated Engineering Summit (IIES 2014)
|
2013 |
Fire risk assessment of heritage building: the influence of regulatory body and restorer’s background on the assessment criteria.
In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan 2013
|
2013 |
Parametric study of earth-to-air heat exchanger in Malaysian climate.
In: The Asian Conference on Sustainability, Energy and the Environment 2013
|
2013 |
Fire risk assessment of heritage building - perspectives of building stakeholders.
In: IRIIE 2013
|
2012 |
Acceptability of Malaysian construction practitioners in adopting 4D.
In: First International Conference on Islamic Built Environment
|
2012 |
Malaysian labour productivity for reinforced concrete structural frame: a case study .
In: Malaysian Science Technology Congress
|
2012 |
Reliving the traditional masjid architecture in contemporary
world : the case of Masjid Al Falah - KAED Community Project.
In: IRIIE 2012
|
2012 |
Partnering between main contractors and sub-contractors in construction projects.
In: first International Conference on Islamic Built Environment
|
2011 |
The acceptability of four dimension (4D) virtual construction in Malaysia.
In: Intenational Conference on Universal Design in Built Enviroment
|
2010 |
Investigate the influential factors that impart efficient responses to the structual reliability and sustainability.
In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
|
2010 |
User-centered design and evaluation of e-heritage: a virtual reality prototype for learning architectural heritage in informal education.
In: 10th International Conference on Construction Applications of Virtual Reality (CONVR 2010)
|
2010 |
Assessment of mould growth in selected hospital : Air conditioning system aspect.
In: 30th International Seminar For Public Health Group of the Union of International Architects
|
2009 |
Environmental impacts of ecotourism on mangrove: case study of Kuala Selangor Nature Park.
In: 6th Workshop on Sosial Capital and Development Trends in the Japanese and Swedish Countryside
|
2009 |
Optimization of cooling systems in data centre by computational fluid dynamics model and simulation.
In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA 2009)
|
2009 |
A new tool for assessment of mould growth on building materials.
In: 3rd International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO 2009)
|
2008 |
Sustainable residential low density urban development: integrating sustainable consciousness with commercial viability.
In: 2008 World Sustainable Building Conference
|
2008 |
Integration of environmental performance in a virtual reality framework: case study of Putrajaya.
In: 8th International Conference on Construction Applications ov Virtual Reality (CONVR 2008)
|
2008 |
Proposed research for optimization of the performance of cooling system in data center facilities.
In: 7th Annual Conference Management in Construction Researchers’ Associations MICRA 2008
|
2008 |
Integrating a computational fluid dynamics simulation and visualization with a 3D virtual walk through - a case study of Putrajaya .
In: 8th International Conference on Construction Applications ov Virtual Reality (CONVR 2008)
|
2007 |
Virtual reality in heritage studies and historical reconstruction through animation – A case study of a 16th century university complex in the Ottoman world.
In: 7th International Conference on Construction Applications of Virtual Reality: 0ctober 22-23, 2007
|
2007 |
Virtual reality in heritage studies and historical reconstruction through animation – A case study of a 16th century university complex in the Ottoman world.
In: 7th International Conference on Construction Applications of Virtual Reality:
|
Book Section |
2016 |
Passive design of two modern Masjids in Malaysia.
In: Dimension of Masjid Architecture - Perspective and Writings in Theory and Design
Kulliyyah of Architecture & Al Bukhary Faundation
. ISBN 978-983-3142-33-0
, pp.237-247
|
2016 |
Passive design of two modern Masjids in Malaysia.
In: Dimension of Masjid Architecture - Perspective and Writings in Theory and Design
Kulliyyah of Architecture & Al Bukhary Faundation
. ISBN 978-983-3142-33-0
, pp.237-247
|
2016 |
Reminiscing traditional masjid architecture in a contemporary world: The making of Masjid Al-Falah.
In: Dimensions of Masjid Architecture-Perspectives and Writings in Theory and Design
Kulliyyah of Architecture and Environmental Design, IIUM
. ISBN 978-983-3142-33-0
, pp.199-206
|
2015 |
Measurement of quality in building constructed using Industrialised Building System (IBS) and conventional method.
In: Methodologies in Architectural Research
IIUM Press
. ISBN 978-967-418-331-8
, pp.65-85
|
2015 |
Measurement of quality in building constructed using Industrialised Building System (IBS) and conventional method.
In: Methodologies in Architectural Research
IIUM Press
. ISBN 978-967-418-331-8
, pp.65-85
|
2011 |
Environmental impacts of ecotourism on mangrove : case study of Kuala Selangor Nature Park.
In: Social capital and development trend in rural area
Marginal Areas Research Group
. ISBN 9784907830076
, pp.101-111
|
2011 |
Environmental impacts of ecotourism on mangrove : case study of Kuala Selangor Nature Park.
In: Social capital and development trend in rural area
Marginal Areas Research Group
. ISBN 9784907830076
, pp.101-111
|
2011 |
The acceptability of four dimension (4D) virtual construction in Malaysia .
In: Green Architecture in Built Environment
IIUM Press
. ISBN 9789674180393
, pp.53-69
|
2011 |
Managing construction projects through shared online calendar .
In: Readings In Contemporary Construction Technology and Management
IIUM Press
. ISBN 9789674180515
, pp.30-39
|
2011 |
Effectiveness of substation monitoring system.
In: Readings In Contemporary Construction Technology and Management
IIUM Press
. ISBN 9789674180515
, pp.168-184
|
2011 |
Risk management in construction projects in Malaysia .
In: Readings In Contemporary Construction Technology and Management
IIUM Press
. ISBN 9789674180515
, pp.40-54
|
2011 |
Mould growth prevention in public hospitals: fundamentals, challenges and issues.
In: Issues in facilities management and maintenance: a Malaysian perspective
IIUM Press
. ISBN 9789674180355
, pp.1-39
|
2011 |
Flat roof construction and systems principles and issues in maintenance management.
In: Issues in facilities management and maintenance: a Malaysian perspective
IIUM Press
. ISBN 9789674180355
, pp.77-94
|
2011 |
Defects and deterioration of multi-storey building facades: issues and challenges.
In: Issues in facilities management and maintenance: a Malaysian perspective
IIUM Press
. ISBN 9789674180355
, pp.95-118
|
2011 |
Fire safety in buildings and fire door assesment: principles and standards.
In: Issues in facilities management and maintenance :a Malaysian perspective
IIUM Press
. ISBN 9789674180355
, pp.119-139
|
2010 |
Ministry of Energy, Water, Communication (MEWC) building
Putrajaya, Malaysia.
In: Sustainable buildings in practice
Routledge
. ISBN 9780415399326
, pp.295-303
|
2010 |
Ministry of Energy, Water, Communication (MEWC) building
Putrajaya, Malaysia.
In: Sustainable buildings in practice
Routledge
. ISBN 9780415399326
, pp.295-303
|
2006 |
Integrating a computational fluid dynamics simulation and visualization with a 3D virtual walkthrough - a case study of Putrajaya.
In: Innovations in 3D Geo Information Systems
Springer
. ISBN 978-3-540-36997-4
, pp.599-614
|