Fakulti

Fakulti

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Hazleen Bt. Anuar
Professor

Print CV Email Me

Staff Detail


Assoc. Prof. Dr. Hazleen binti Anuar, a graduate of the University Kebangsaan Malaysia (UKM), started her career as a manufacturing engineer, at Solectron Technology Sdn. Bhd. (Johor) in 1999. She joined the International Islamic University Malaysia in 2002 as an Assistant Lecturer, and obtained her Ph.D in Materials Science, from University Kebangsaan Malaysia (UKM) in 2007 and later appointed as an Associate Professor in Materials Engineering in 2012.

  • Ph.D in Material Science - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • Bachelor of Science in Material Science - Bachelor Degree, Universiti Kebangsaan Malaysia (UKM)
  • Natural Science ~ Material Sciences ~ Polymeric Materials ~ Biopolymers - Synthesis of polylactic acid from kenaf biomass
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Nano Materials - Nanofibre from cellulose
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Polymer Compounds - Thermoplasticand biodegradable composites
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Composite Materials - Natural and synthetic fibre composites
  • 2015 - 2016 Chartered Engineer, Institute of Materials, Minerals and Mining
  • 2010 - 2015 Member, Malaysian Scientific Association (MSA)
  • 2009 - 2015 Member, The Institute of Materials Malaysia (IMM)
  • 2010 - 2014 , IIUM
  • 2011 - 2014 , Plastics Rubber Institute of Malaysia (PRIM)
ADVANCED COMPOSITE MATERIALS 2007/2008 2019/2020
APPLIED POLYMER PROCESSING 2007/2008 2008/2009 2009/2010
BIO COMPOSITES 2017/2018
COMPOSITE MATERIALS 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013
COMPOSITE MATERIALS AND PROCESSING 2011/2012 2012/2013 2014/2015 2015/2016 2016/2017 2017/2018
CONTEMPORARY MATERIALS FOR ENGINEERING APPLICATIONS 2018/2019
Composites 2018/2019 2019/2020 2020/2021
ENGINEERING MATERIALS 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013
FINAL YEAR PROJECT I 2018/2019 2019/2020
FINAL YEAR PROJECT II 2019/2020
HIGH PERFORMANCE POLYMERIC MATERIALS 2016/2017
INTEGRATED DESIGN PROJECT 2014/2015 2015/2016
MANUFACTURING OF COMPOSITE MATERIALS 2007/2008 2008/2009 2009/2010
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING 2017/2018 2018/2019 2019/2020 2020/2021
MATERIALS ENGINEERING LAB IV 2017/2018 2018/2019 2019/2020 2020/2021
MATERIALS ENGINEERING LAB VI 2009/2010 2010/2011 2011/2012 2012/2013
MATERIALS LABORATORY I 2007/2008
MATERIALS SCIENCE AND ENGINEERING 2010/2011 2011/2012 2012/2013
Materials Engineering Lab 4 2017/2018
POLYMER PROCESSING 2007/2008 2008/2009 2010/2011 2017/2018
PROJECT I 2008/2009 2009/2010 2016/2017
SEMINAR 2007/2008
SEMINAR II 2007/2008
In Progress
2020 - Present Toughened halloysite reinforced PA 11 nanocomposites
2020 - Present Sustainable Soda Lignin-PLA 3D Printable Biocomposite Materials
2019 - Present Sustainable Durian Skin Fibre Biocomposites for 3D Printable Filaments
2019 - Present Dyes Adsorption Using Hybrid Aerogel-Based Cellulose Nanocrystal Isolated From Palm Oil Biomass
2019 - Present Microwave-Assisted Polymerization of Polylactic Acid- Palm Oil Polyurethane
2019 - Present Investigation on the Effectiveness of Diamond Reinforcement in Strengthening Porous Aluminum
2019 - Present Highly Efficient Li-Ion Battery Recycling with capacity-sorted optimisation for secondary energy storage system
2019 - Present Chitosan-copolymer loaded Acalypha indica extract for drug delivery
2019 - Present Microcellular Polylactic Acid Biocomposite Foam via Supercritical Carbon Dioxide for Single Use Packaging
2018 - Present Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications.
2018 - Present Polylactic Acid Biocomposite for Active Packaging
2017 - Present Formulation of mechanical characteristics of palm oil fibre composite manufactured via vacuum bagging method
2016 - Present Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2016 - Present Integrated Green Assessment of Poultry Waste Input-Output in Malaysia Farming Industry
2016 - Present Active Packaging from Polylactic Acid Biocomposite Film via Supercritical Fluids Impregnation
2016 - Present Study on Miscibility and Degradation Behavior on Polylactic Acid / Thermoplastic polyurethane Blend
2015 - Present Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application
2009 - Present Advanced Materials and Surface Engineering (AMSERU)
Unknown - Present Toughened halloysite reinforced PA 11 nanocomposites
Unknown - Present Chitosan-copolymer loaded Acalypha indica extract for drug delivery
Unknown - Present Polylactic Acid Biocomposite for Active Packaging
Completed
2016 - 2020 Development of bionanocomposite reinforced with sugarcane bagasse nanocellulose and incorporated with natural antimicrobial agent for food packaging applications
2016 - 2019 Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2016 - 2019 Study on Miscibility and Degradation Behavior on Polylactic Acid / Thermoplastic polyurethane Blend
2016 - 2019 Active Packaging from Polylactic Acid Biocomposite Film via Supercritical Fluids Impregnation
2016 - 2020 Development of bionanocomposite reinforced with sugarcane bagasse nanocellulose and incorporated with natural antimicrobial agent for food packaging applications
2015 - 2018 Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application
2014 - 2017 Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene
2014 - 2017 Synthesis and Characterizations of Novel Polyurethane based on Poly (lactic acid) Polymer for Green Packaging Materials
2014 - 2017 Mechanism of Surface Degradation of Durian Skin Fibre Composite for Outdoor Application
2014 - 2018 Mophorlogy and Electrical Properties of Polylactide / Natural Rubber Blend Filled with Conductive Nano Carbon
2014 - 2016 Novel Method to Synthesize Polymeric Biphasic Micro-Particles Using Droplet Microfluidic Lab on a Chip
2014 - 2016 Engineered Properties of Biodegradable Poly(lactic acid) Using Environmental-Friendly Additives
2013 - 2016 Isolation and Characterization of Microfibrillated Cellulose (MFC) Obtained from Cocoa Pod Husks Treated via Fungal Pretreatment Combined with Homogenization
2013 - 2016 Fundamental Studies on Hybrid ZnO-SiO2 Sol-gel Nanocoating for Anticorrosion Protection of Carbon Steel
2013 - 2015 Development of Environmental Friendly ZnO Nanocoating for Building Applications
2013 - 2016 Fabrication of High-Performance Carbon Nanotube Field-Effect Transistor by Alcohol Catalytic Chemical Vapor Deposition Method
2013 - 2016 Modelling of High Performance Lightweight Nanocomposite Sport Shoes During Running
2012 - 2013 Study the Effect of Kenaf Biomass' Morphology and its Chemicals Constituents on the Pre-Treatment Process and Production of L(+) Lactic Acid.
2012 - 2014 Potential of Microcrystalline Cellulose (MCC) as reinforcement in Polymer Composite
2012 - 2016 Development of Green Recyled-PP Composites for High Strengh Applications
2012 - 2015 Prototype Development of High Performance Lightweight Nanocomposite Sport Shoes
2012 - 2015 Exploring the Potential of during Skin Waste as a Filler in Biodegradable Polymer
2011 - 2012 Hydrolysis of Glucose in Kenaf Biomass
2011 - 2014 RU 2011: Mechanical and Thermal Properties of Bioplastic Nanocomposites
2011 - 2011 Malaysian Natural Fibre For Diverse Bio-Based Applications (KVC 2011)
2011 - 2012 Effect Of Nanoclay On The Mechanical Properties Of Kenal Fibre Reinforced Polylacticacid (PLA) Hybrid Biocomposite
2010 - 2012 The development of the thermoplastic starch for biodegradable fabrics
2009 - 2010 Prediction of Failure Mechanism of Polylactic Acid-Kenaf Fibre Biocomposites Using Acoustic Emission Parameters
2009 - 2011 The Effect of Nano-modification on the Interphase Characteristic of the Multiscales Biocomposite with the Added of Nanoclay
2009 - -1 The Effect of Nano-modification on the Interphase Characteristic of the Multiscales Biocomposite with the Added of Nanoclay
2009 - 2010 Fibre-matrix Interaction and Thermo-physical of PP/EPDM Composite Reinforced with Kenaf Fibre
2009 - 2011 Prediction of Failure Mechanism of Polylactic Acid-Kenaf Fibre Biocomposite Using Acuostic Emission Parameters
2009 - 2011 The Effect of Electron Beam Radiation on Mechanical properties of HDPE/EPDM-Organo Montmorillonite Nanocomposites
2008 - 2011 Development of In-House Insulator Using Palm Oil Resin and Hibiscus Cannabinus, L
2008 - 2009 Rubber Toughened Polycarbonate-kenaf Fiber Composite
2008 - 2009 Nanocomposites Rubber Toughened Polycarbonate for Gas Barrier Application
2008 - 2009 Development and Characterization of Medium Density Fiber Board using National Resource: Palm Oil Resin and Kenaf
24 September 2015 Department Best Indexed Journal Articles. Others - University level.
24 September 2013 Promising Researcher Award. Others - University level.
Article
2020 Mechanical properties, morphology and hydrolytic degradation behavior of polylactic acid / thermoplastic polyurethane blends. IIUM Engineering Journal , 21 (1) pp.193-201
2020 The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal , 21 (1) pp.212-227
2020 Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers , 12 (8) pp.1-11
2020 Enhanced flexibility of polylactic acid/epoxidized palm oil/pineapple fiber composites. Biological And Natural Resources Engineering Journal , 3 (1) pp.1-7
2020 Potential food additive of Boswellia carterii essential oil encapsulated within gum Arabic: a particle size distribution and zeta potential analysis. Food Research , 4 (Supplementary 2) pp.1-5
2019 Degradation properties of biodegradable polymers. Journal of Wastes and Biomass Management (JWBM) , 1 (2) pp.05-08
2019 From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences , 20 (16) pp.1-23
2019 Biodegradable polymer composite for cosmetic patch. Biological and Natural Resources Engineering Journal (BNREJ) , 2 (2) pp.49-64
2018 Environmental degradation of durian skin nanofibre biocomposite. IIUM Engineering Journal , 19 (1) pp.223-236
2018 Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research , 2 (1) pp.17-28
2018 Selective localization of multi-walled CNT in polylactic acid /thermoplastic polyurethane blends and its effect on mechanical properties. Current Nanomaterials , 2 (2) pp.84-89
2018 Enhanced flexibility of biodegradable polylactic acid/starch blends using epoxidized palm oil as plasticizer. Polymers , 10 (9) pp.1-12
2018 Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik , 49 (4) pp.460-466
2018 Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research , 2 (1) pp.17-28
2018 Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology , 1 (Special Issue 1) pp.447-451
2018 Physical and functional properties of durian skin fiber biocomposite films filled with natural antimicrobial agents. BioResources , 13 (4) pp.7255-7269
2018 Effect of UV radiation on degradation of durian skin fibre composite. International Journal of Engineering Materials and Manufacture , 3 (2) pp.105-112
2018 Effect of supercritical carbon dioxide on tensile Properties of Durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology , Special issue pp.197-202
2017 Impregnation of cinnamon essential oil into plasticised polylactic acid biocomposite film for active food packaging. Journal of Packaging Technology and Research , 1 (3) pp.149-156
2016 Tensile properties of durian skin fibre reinforced plasticized polylactic acid biocomposites. International Journal of Materials and Manufacture [IJEMM] , 1 (1) pp.16-20
2016 Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences , 20 (5) pp.1153-1158
2016 Effect of fungal pretreatment by Aspergillus niger assisted by ultrasonication on microfibrillated cellulose obtained from cocoa pod husk . Journal of Advanced Research in Material Sciences , 21 (1) pp.1-13
2016 Preparation and characterization of plasticized polylactic acid/starch blend. Jurnal Teknologi , 78 (11-2) pp.7-12
2016 Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology , 230 (2) pp.100-110
2016 Fabrication and compressive properties of low to medium porosity closed-cell porous aluminum using PMMA space holder technique. Materials , 9 (4) pp.254-1-254-13
2015 Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. Advanced Materials Research , 1115 pp.414-417
2015 Preparation of durian skin nanofibre (DSNF) and its effect on the properties of polylactic acid (PLA) biocomposites = Penyediaan nano-serabut kulit durian (DSNF) dan kesannya ke atas sifat biokomposit asid polilaktik (PLA). Sains Malaysiana , 44 (11) pp.1551-1559
2015 Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research , 1115 pp.410-413
2015 Flexing test of HDPE/EPR filled CNT radiated nanocomposites for sport shoe soles. Materials Testing , 57 pp.904 -908
2015 Effects of coupling agent on the properties of durian skin fibre filled polypropylene composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering , 9 (12) pp.1261-1265
2015 Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites. Materials and Design , 69 pp.114-123
2015 Effects of dilute acid pretreatment on chemical and physical properties of kenaf biomass . Journal of Natural Fibers , 12 (3) pp.256-264
2015 Effect of nanofiller on flexing mechanism of HDPE/EPR nanocomposite for sport shoe sole application . Advanced Materials Research , 1115 pp.382-385
2015 Matrix cracking in reinforced polymer nanocomposites: a review. Journal of Advanced Review on Scientific Research , 11 (1) pp.13-36
2014 Study of chemical and thermal properties of kenaf biomass-based polylactic acid (PLA). Advances in Environmental Biology , 8 (3 Spec. Issue) pp.633-638
2014 Improvement in thermomechanical properties of injection molded nano-modified hybrid biocomposite. Journal of Thermoplastic Composite Materials , 27 (7) pp.992-1009
2014 Optimizing the parameters in durian skin fiber reinforcedpolypropylene composites by response surface methodology. Industrial Crops and Products , 54 pp.291-295
2014 Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design , 59 pp.279-286
2014 Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. International Journal of Engineering Research , 3 (3) pp.186-189
2014 Potential of electron beam irradiated hdpe/epr blend as shoes sole. Movement, Health & Exercise , 3 pp.49-56
2014 Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite. Materials Research Innovations , 18 (6) pp.SD-190
2013 Ductile-brittle transition temperature of polylactic acid-based biocomposite . Journal of Thermoplastic Composite Materials , 26 (2) pp.216-226
2013 Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite. Iranian Polymer Journal (English Edition) , 22 (2) pp.123-131
2012 Properties of montmorillonite-reinforced thermoplastic sago starch composites . Advanced Materials Research , 445 pp.469-474
2012 Influence of Maleic anhydride on mechanical properties and morphology of Hydroxyapatite/Poly-(lactic acid) composites. Regenerative Research , 1 (2) pp.32-38
2012 Evaluation of maximum percentage glucose conversion for dilute acid hydrolysis of kenaf biomass using statistical analysis. Advanced Materials Research , 576 pp.244-247
2012 Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. Advanced Materials Research , 576 pp.248-251
2012 Characterization on surface modification of kenaf biomass via microbial fermentation. Advanced Materials Research , 576 pp.268-271
2012 Preparation and characterization of physical properties of Durian skin fibers biocomposite. Advanced Materials Research , 576 pp.212-215
2012 Dynamic mechanical behaviour of Poly Ethylene Glycol Plasticized Polylacticacid. Advanced Materials Research , 576 pp.224-227
2012 Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/clay composite. Advanced Materials Research , 576 pp.318-321
2012 Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite . Journal of Thermoplastic Composite Materials , 25 (2) pp.153-164
2012 Thermal properties of PLA/kenaf green nanocomposite: Effect of chemi-mechanical treatment. Advanced Materials Research , 576 pp.342-344
2012 Thermogravimetric analysis of OMMT filled HDPE/EPDM treated EB irradiation. Advanced Materials Research , 576 pp.362-365
2012 Physical and mechanical properties of Thermoplastic Natural Rubber (TPNR) nanocomposites. Advanced Materials Research , 576 pp.394-397
2012 Evaluation of elastic modulus and hardness of polylactic acid-based biocomposite by nano-indentation. Advanced Materials Research , 576 pp.446-449
2012 The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal , 19 (2) pp.715-719
2011 Effects of high energy radiation on mechanical properties of PP/EPDM nanocomposite. Advanced Materials Research , 264 pp.738-742
2011 Modification of tensile and impact properties of crosslinked rubber toughened nanocomposites via electron beam irradiation. Canadian Journal on Scientific & Industrial Research , 2 (3) pp.95-101
2011 Effect of Rhizopus Oryzae Fermentation on Kenaf-based Polylactic Acid’s Monomer. IIUM Engineering Journal , 12 (4) pp.83-87
2011 Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering , 42 pp.462-465
2011 The influence of EB-irradiated treatment on enhancing barrier property and crystallization behavior of rubber-toughened nanocomposites. Journal of Nanotechnology , 2011 pp.8 pg.
2011 Compatibilized PP/EPDM-kenaf fibre composite using melt blending method. Advanced Materials Research , 264 pp.743-747
2011 Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers , 8 (1) pp.14-26
2011 The effects of high energy radiation on the tensile properties of rubber toughened nanocomposites. Advanced Materials Research , 264 pp.765-770
2011 Enhancing the mechanical properties of cross-linked rubber-toughened nanocomposites via electron beam Irradiation. Journal of Nanotechnology
2011 Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials , 26 (2) pp.216-226
2011 Effects of MAPE and EB irradiation techniques on the mechanical properties of crosslinked rubber toughened nanocomposites. Journal of Rubber Research , 14 (4) pp.200-215
2011 The study of biodegradable thermoplastics sago starch. Key Engineering Materials , 471 pp.397-402
2011 Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials , 472-72 pp.928-932
2011 Effect of electron beam irradiation (EB) on gas barrier property of HDPE/EPDM nanocomposites. Key Engineering Materials , 471 pp.775-780
2011 Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials , 471 pp.781-785
2011 Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal , 6 (1) pp.51-57
2010 The mechanical and physical properties of thermoplastic natural rubber hybrid composites reinforced with hibiscus cannabinus, L and short glass fiber. Polymer-Plastics Technology and Engineering , 49 (13) pp.1315-1322
2010 A linear relationship between the tensile, thermal and gas barrier properties of mape modified rubber toughened nanocomposites. IIUM Engineering Journal , 11 (2) pp.225-239
2008 Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber – Part I: Processing parameters and tensile properties. Journal of Composite Materials , 42 (11) pp.1075-1087
2008 Mechanical properties and dynamic mechanical analysis of thermoplastic-natural-rubber-reinforced short carbon fiber and kenaf fiber hybrid composites. Journal of Applied Polymer Science , 107 (6) pp.4043-4052
2007 Mechanical and fracture toughness behavior of TPNR nanocomposites. Journal of Composite Materials , 41 (17) pp.2147-2159
2007 Essential work of fracture and acoustic emission study on TPNR composites reinforced by Kenaf Fiber. Journal of Composite Materials , 41 (25) pp.3035-3049

Conference or Workshop Item

2019 Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018)
2018 Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Effect of coupling agent on durian skin fibre nanocomposite reinforced polypropylene. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2015 Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. In: International Conference on Advanced Manufacturing and Materials Engineering 2014 (ICAMME 2014)
2015 Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014)
2015 Plasticizing Poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material. In: Malaysia Polymer International Conference (MPIC 2015)
2015 Preparation and characterization of plasticized Polylactic acid/starch blend. In: 5th International Conference on Advancement in Science and Technology (iCAST 2015)
2015 Flexible and biodegradable film for environmental friendly packaging material. In: IIRIE 2015
2013 Mechanical properties of recycled PP reinforced with microcrystalline cellulose: effect of MAPP content. In: 9th International Conference on Composite Science and Technology (ICCST/9)
2012 Extraction of glucose from kenaf core using mild acid treatment . In: 26th Symposium of Malaysian Chemicals Engineers in conjunction with the 4th International Conference on Chemical and Bioprocess Engineering
2012 Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012)
2012 Processing and characterization of durian skin fibers composites: Mechanical properties. In: 1st International Conference on Design and Innovation 2012
2012 The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces
2012 Effect of maleic anhydride (MA) on thermal properties of polylactic acid (PLA) composites reinforced with durian skin fiber (DSF). In: 1st International Conference on Design and Innovation 2012
2012 Effect of maleic anhydride on mechanical properties of Polylactic Acid (PLA) composites reinforced with Durian Skin Fiber (DSF). In: 1st International Conference on Design and Innovation 2012
2012 Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012)
2012 Effect of PEG on tensile properties of PLA-Based biocomposite. In: The International Conference on Composite Interfaces
2011 Optimizing the pre-treatment of kenaf bast. In: Malaysia Polymer International Conference 2011 (MPIC 2011)
2011 Properties of compression moulding starch - nanoclay biocomposites . In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19)
2011 Effect of Nanoclay on Thermal Properties of Polylacticacid-Clay Nanocomposite. In: Malaysia Polymer International Conference 2011 (MPIC 2011)
2011 Kenaf biomass as potential biopolymer. In: Malaysia Polymer International Conference 2011 (MPIC 2011)
2011 Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Effect of Nanoclay on Thermal Properties of Polylacticacid-Kenaf Hybrid Bio-composite. In: International Conference on Chemical Engineering (ICChE 2011)
2011 Properties of montmorillonite-reinforced thermoplastic sago starch composites . In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
2011 Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. In: 20th Scientific Conference of the Microscopy society of Malaysia (EMSM 2011)
2011 The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC)
2011 Electron beam irradiated nanocomposite for gas barrier application. In: IIUM Research, Invention and Innovation Exhibition IRIIE 2011
2011 Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011)
2011 Kenaf: renewable source for biopolymer. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011
2011 Eco-friendly PLA-kenaf fibre biocomposite for food packaging . In: Malaysia Technology Expo (MTE 2011)
2011 Electron beam irradiated nanocomposite for gas barrier application . In: Malaysia Technology Expo (MTE 2011)
2011 Kenaf as natural resource for lactic acid production. In: Malaysia Polymer International Conference 2011 (MPIC 2011)
2010 An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010)
2010 Development of reinforced thermoplastic elastomer with kenaf bast fibre for automotive component. In: 14th European Conference on Composite Materials
2010 Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010)
2010 Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 Lactic acid production from Kenaf fibre. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2010 A comparative study on the mechanical properties of clay-modified epoxy adhesive by using different clay types. In: 14th European Conference On Composite Materials (ECCM14)
2010 Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM)
2010 Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition
2010 New potential of biomaterials from kenaf fibre biomass . In: Islamic Innovation Expo 2010 (i-Inova’ 2010)
2010 Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010)
2009 Preliminary studies of rubber toughened polypropylene - kenaf fiber composite. In: 4th International Conference on Recent Advabces in Materials, Minerals & Environment and 2nd Asian Symposium on Material and Processing

Book

Book Section

2019 Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites Springer Nature Switzerland . ISBN 978-3-030-05398-7 , pp.413-436
2018 Structural, thermal, mechanical and rheological properties of polylactic acid/epoxidized soybean oil/organoclay blends. In: Reference module in materials science and materials engineering Elsevier . ISBN 978-0-12-803581-8 , pp.1-8
2016 Effect of plasticizer on fracture toughness of polylactic acid reinforced with kenaf fibre and montmorillonite hybrid biocomposites. In: Nanoclay reinforced polymer composites: natural fibre/nanoclay hybrid composites Springer . ISBN 978-981-10-0949-5 Online ISBN , pp.263-280
2014 Polylactic acid-based kenaf biomass synthesized via ring opening polymerization. In: Biomass and Bioenergy Applications Springer International Publishing . ISBN 978-3-319-07577-8; 978-3-319-07578-5 (ebook) , pp.211-231
2011 Surface topography of sulphuric treated carbon fibre. In: Advances in Materials Engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.151-156
2011 Effect of processing parameters on the tensile properties of TPNR reinforced short carbon fibre composite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.11-15
2011 Effect of maleic anhydride polyethylene on damping properties of HDPE/EPDM nanocomposite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.16-21
2011 Comparative study on the effect of plasticizer on thermal properties of Polylactic acid. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.22-27
2011 Synthesis lactic acid from Kenaf Bast by using Lactobacillus rhamnosus. In: Bioprocessing of lactic acid by fermentation techniques. IIUM Press . ISBN 9789674180935 , pp.83-91
2011 Factors affecting the hydrolysis process of Kenaf Biomass for lactic acid production. In: Bioprocessing of Lactic Acid by Fermentation Technique IIUM Press . ISBN 9789674180935 , pp.93-99
2011 Growth kinetic study of Rhizopus oryzae via fermentation of lactic acid from kenaf biomass. In: Bioprocessing of Lactic Acid by Fermentation Technique IIUM Press . ISBN 9789674180935 , pp.101-111
2011 Tensile and impact properties enhancement of crosslinked high density polythlene and ethylene propylene diene monomer nanocomposites via electron beam irradiation. In: Advances in nanotechnology & its application IIUM Press . ISBN 9789670225876 , pp.62-81
2011 Enhanced tensile strength with sulphuric treated short carbon fibre. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.74-78
2011 Effect of fibre length on tensile properties of TPNR-Kenaf fibre composite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.79-83
2011 Effect of nanoclay on mechanical properties of PLA-clay nanocomposite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.84-89
2011 Extraction of glucose from Kenaf core by using chemical pre-treatment process. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.90-95
2011 Polylactic acid bio-composite for food packaging. In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.99-109
2011 Dynamic mechanical analysis of carbon fibre composites . In: Advances in materials engineering - volume 2 IIUM Press . ISBN 9789674181680 , pp.25-30
2011 Potential of kenaf in economic perspectives . In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.21-27
2011 Lightweight kenaf fibre composite for automotive component . In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.29-38
2011 Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: Malaysia natural fibers for diversed bio-based application IIUM Press . ISBN 9789674180218 , pp.111-120
2011 Surface quality of Dipterocarpus spp under tropical climate change: effect of pre-weathering. In: Advances in Materials Engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.146-150