الكليات

الكليات

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Noor Azlina Binti Hassan
Associate Professor

Print CV Email Me

Staff Detail


Dr. Noor Azlina Hassan, a graduate of University Kebangsaan Malaysia, started her career as a researcher at the Faculty of Science and Technology, UKM, in 2003. She was appointed as an Assistant Professor in Manufacturing and Materials Engineering (IIUM) in 2011. She obtained the Bachelor of Science (Materials Science), Master of Science (Materials Science) and Degree of Doctor of Philosophy in Materials Science from UKM. She was selected for a scholarship for sub-specialist/post-doctoral in 2013 and worked with IBM, Research Centre, USA under a special research programme with the Ministry o ... show more

  • Ph.D in Material Sciences - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • M.Sc in Material Science - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
  • B.Sc (Hons) in Materials Science - Bachelor Degree, Universiti Kebangsaan Malaysia (UKM)
  • Engineering Tech ~ Applied Sciences And Technologies ~ Aerospace ~ Advanced Materials-Composite Special Alloys - Materials Sciences, Nanocoating, Nanomaterials, Polymeric Materials, Nanocomposites.
  • 2017 - 2017 Invited Speaker, Collaborative Conference Materials Research (CCMR 2017)
  • 2016 - 2016 , 3rd Advanced Materials Conference 2016 (AMC 2016)
  • 2016 - 2016 , International Conference on Design and Concurrent Engineering (5th iDECON 2016)
  • 2016 - 2016 , International Conference on Design and Concurrent Engineering (5th iDECON 2016)
  • 2016 - 2016 Invited Speaker, Collaborative Conference on 3D and Materials Research (CC3DMR 2016)
ADVANCED MATERIALS CHARACTERIZATION 2019/2020 2020/2021
CONTEMPORARY MATERIALS FOR ENGINEERING APPLICATIONS 2018/2019
FINAL YEAR PROJECT I 2018/2019 2019/2020
FINAL YEAR PROJECT II 2019/2020
FUNDAMENTALS OF MATERIALS ENGINEERING 2018/2019 2019/2020 2020/2021
MATERIALS CHARACTERIZATION 2014/2015 2015/2016 2016/2017
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING 2016/2017 2017/2018 2018/2019 2019/2020 2020/2021
MATERIALS ENGINEERING LAB II 2017/2018 2018/2019
MATERIALS ENGINEERING LAB III 2011/2012 2012/2013 2014/2015 2015/2016 2016/2017
MATERIALS ENGINEERING LAB IV 2013/2014 2014/2015
NANOMATERIALS 2017/2018 2019/2020
NDT AND EVALUATIONS 2012/2013
NONDESTUCTIVE TESTING AND EVALUATION 2011/2012 2012/2013 2014/2015
Nanomaterials 2020/2021
POLYMER PHYSICS 2011/2012 2012/2013 2015/2016 2017/2018
POLYMER PROCESSING 2018/2019
SEMINAR 2013/2014 2014/2015
SEMINAR II 2011/2012
SPECIAL TOPICS IN MATERIALS ENGINEERING 2011/2012 2012/2013
In Progress
2019 - Present Dyes Adsorption Using Hybrid Aerogel-Based Cellulose Nanocrystal Isolated From Palm Oil Biomass
2018 - Present Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications.
2017 - Present Mechanism of the adhesion in between of polyelectrolyte layers and nanoreservoir for self-healing nanocoating.
2016 - Present Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2015 - Present Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application
2009 - Present Advanced Materials and Surface Engineering (AMSERU)
Completed
2016 - 2019 Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite
2015 - 2018 Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application
2014 - 2017 Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene
2013 - 2016 Fundamental Studies on Hybrid ZnO-SiO2 Sol-gel Nanocoating for Anticorrosion Protection of Carbon Steel
2013 - 2015 Development of Environmental Friendly ZnO Nanocoating for Building Applications
2012 - 2015 Prototype Development of High Performance Lightweight Nanocomposite Sport Shoes
2012 - 2016 Development of pultruded green hybrid typha latifolia / recycled polyethyleneterepthalate composites
2011 - 2014 RU 2011: Mechanical and Thermal Properties of Bioplastic Nanocomposites
Article
2018 Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology , 1 (Special Issue 1) pp.378-383
2018 Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology , 1 (Special Issue 1) pp.447-451
2018 Influence of epoxidized palm oil on polyhydroxyalkanoates tensile properties. International Journal of Current Science, Engineering & Technology , 1 (Special Issue 1) pp.556-559
2018 Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology , Special issue pp.63-67
2017 Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science , 39 (1) pp.1-7
2017 Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. Materials Science Forum , 894 (4) pp.62-65
2017 Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology , 7 (Issue 1) pp.19-24
2016 Biodegradation properties of poly (Lactic) acid reinforced by kenaf fibers. ACTA PHYSICA POLONICA A , 129 pp.835-837
2016 Effect of nanoparticles on wettability of nanocoating on carbon steel. International Journal of Engineering Materials and Manufacture (IJEMM) , 1 (2) pp.71-74
2016 Green biosynthesis of silver nanoparticles using ‘Polygonum hydropiper’ and study its catalytic degradation of methylene blue . Procedia Chemistry , 19 pp.594-602
2015 Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research , 1115 pp.275-278
2015 The effects of various TPNR binder compositions on feedstock preparation for MIM process. Advanced Materials Research , 1115 pp.304-307
2015 Morphology and mechanical properties of MIM feedstock using TPNR backbone binder. Advanced Materials Research , 1115 pp.279-282
2013 Effects of Multi-Walled Carbon Nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid Nanocomposites. Advanced Materials Research , 812 pp.181-186
2013 Thermal analysis of kenaf sandwich panel. Advanced Materials Research , 812 pp.271-274
2012 Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/clay composite. Advanced Materials Research , 576 pp.318-321
2012 Thermogravimetric analysis of OMMT filled HDPE/EPDM treated EB irradiation. Advanced Materials Research , 576 pp.362-365
2012 Physical and mechanical properties of Thermoplastic Natural Rubber (TPNR) nanocomposites. Advanced Materials Research , 576 pp.394-397
2012 Effect of nanoclay on the microstructure and the properties of Thermoplastic Natural Rubber (TPNR)/OMMT nanocomposites. Journal of Thermoplastic Composite Materials , 25 (3) pp.351-362
2012 Investigations on metal injection molding of 316L SS using Thermoplastic Natural Rubber (TPNR) binder as a new system. Advanced Materials Research , 576 pp.150-153
2011 Oxygen barrier properties of new thermoplastic natural rubber nanocomposites. Polymer-Plastics Technology and Engineering , 50 pp.1564-1569
2011 Enhanced tensile and dynamic mechanical properties of thermoplastic natural rubber nanocomposites . Polymer-Plastics Technology and Engineering , 50 (13) pp.1383-1387

Conference or Workshop Item

2020 Surface roughness of ZnO-SiO2 nanocoating. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster
2019 Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018)
2018 Preparation of SS316L MIM feedstock with biopolymer as a binder. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2018 Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017
2017 Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017"
2017 Mechanical properties of toughened polyester reinforced with untreated and treated kenaf hybird carbon composite. In: International Conference on Frontiers of Composite Materials (ICFCM 2016)
2016 Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Frontiers of Composite Materials 2016
2016 Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP)
2016 Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016)
2016 Synthesis of SiO2 nanostructures using sol-gel method. In: 5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS 2015)
2012 The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces

Book

2012 Advances in manufacturing and materials engineering. Trans Tech Publications Ltd., . ISBN 978-3-03785-498-3

Book Section

2011 Comparison of mechanical properties between untreated and sulphuric acid treated short carbon fiber reinforced Thermoplastic Natural Rubber (TPNR) composite. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.64-68
2011 Preparation and characterization of Thermoplastic Natural Rubber (TPNR) nanocomposites. In: Advances in materials engineering IIUM Press, International Islamic University Malaysia . ISBN 9789674181673 , pp.1-5
2011 Polymer clay nanocomposite: Part 1. In: Advance in Materials Engineering IIUM Press . ISBN 9789674181673 , pp.6-10
2011 Polymer clay nanocomposites: part I. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.6-10
2011 The effect of processing parameters on tensile properties Empty Fruit Bunch (EFB) fiber reinforced thermoplastic natural rubber composites. In: Advances in composite materials IIUM Press . ISBN 9789674182311 , pp.150-154
2011 Polymer clay nanocomposites: part II - synthesis of polymer nanocomposites. In: Advances in Materials Engineering - Volume 2 IIUM Press . ISBN 9789674181680 , pp.115-119
2011 The effect of processing parameter on tensile properties of thermoplastic natural rubber nanocomposites. In: Advances in materials engineering IIUM Press . ISBN 9789674181673 , pp.58-63