Staff Directory


Sher Afghan Khan

Academic Qualification

  • ENGINEERING (AVIATION / AERONAUTICS / ASTRONAUTICS) - Doctor of Philosophy, Indian Institute of Technology, Kanpur
  • M. Tech. - Masters Degree, IIT, Kanpur, UP
  • Ph. D. - Advanced Diploma, IIT Kanpur
  • B. Sc. Engineering - Bachelor Degree, AMU, Aligarh

Sher Afghan Khan (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


sakhan@iium.edu.my
6517


Expert Profile


Prof. Dr. Sher Afghan Khan is a graduated from Z. H. College of Engineering and Technology, Aligarh Muslim University, Aligarh, India in 1982 with a BSc.Engg.  and M.Tech from Indian Institute of Technology, Kanpur, India in 1984. He started his career as a senior scientific officer at Armament Research and Development, Defense Research and Development Organization, Ministry of Defense, India from 1984 to 1993.
During his stay in Defense Research and Development Organization (DRDO), he was actively involved in the design & development of Missiles, Unguided Rockets, Shells and Bombs. He has worked with the former President of India Dr. A. P. J. Abdul Kalam. who was the scientific adviser to Defense Minister and also the Director General Research and Development. He was appointed as an Associate Professor at Mechanical Engineering Dept., Aligarh Muslim University, Aligarh in 1993 and later he was promoted as Professor in 2001.
He served as Principal/Dean Research and Academic Director at P. A. College of Engineering, Mangalore, Karnataka, India and also at Bearys Institute of Technology, Mangalore, Karnataka, India from 2004 to 2014. He also served as the Principal of Z H College of Engineering & Technology, Aligarh Muslim University, from September 2014 to May 01, 2015. He has guided four Ph.D students and five are working under him. He has published research articles in national and international journals.


Area of Specialisation


  • Engineering Tech ~ Applied Sciences And Technologies ~ Aerospace ~ Advancement of Aerospace Knowledge - Fluid Dynamics/Experimental Aerodynamics


Teaching Responsibilities


ADVANCED FLUID DYNAMIC 2016/2017
AERODYNAMICS 2 2023/2024 2022/2023
AERODYNAMICS II 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
AUTOMOTIVE ENGINEERING LAB II 2018/2019 2016/2017 2015/2016
AUTOMOTIVE ENGINEERING LAB III 2018/2019
FLUID MECHANICS 2023/2024 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016
PROJECT I 2023/2024 2022/2023 2021/2022 2020/2021
PROJECT II 2019/2020 2018/2019
RESEARCH METHODOLOGY & SEMINAR IN MEC ENG (MIXED MODE) 2023/2024 2022/2023 2021/2022 2020/2021
RESEARCH METHODOLOGY & SEMINAR IN MEC ENG (RESEARCH MODE) 2023/2024 2022/2023 2021/2022 2020/2021
RESEARCH METHODOLOGY AND SEMINAR 2023/2024 2021/2022 2020/2021


Supervision


Performance And Emission Prediction Of Multi-Cycle Pulse Detonation Engine Utilizing Alternative Fuels.
Ph.D Completed 2023 Co-supervisor
Conjugate Heat Transfer Analysis Of Battery Pack Using Finite Volume Method.
Ph.D Completed 2022 Main Supervisor
Passive Control Of Single And Multiple Jets Using Cross Wire Vortex Generators At Sonic And Supersonic Mach Numbers.
Ph.D Completed 2021 Main Supervisor
Performance Of Active And Passive Cylinder In Controlling Base Flows.
Ph.D Completed 2019 Main Supervisor
Passive Control Of Base Pressure And The Flow In A Duct With Sudden Expansion At Sonic And Supersonic Mach Numbers.
Ph.D In Progress Main Supervisor
Development And Assessment Of Hydrogen Based Energy Systems For Sustainable Future.
Ph.D In Progress Main Supervisor
Implementing Deep Learning Based Neural Networks For Autism Spectrum Disorder Diagnosis.
Ph.D In Progress Co-supervisor
Investigation Of Lime Dosing In Pneumatic Water Treatment System.
Master Completed 2023 Co-supervisor
Investigation Of Hybrid Rocket Motor Performance By Utilizing Paraffin Wax Based With Energetic Additives.
Master Completed 2023 Co-supervisor
Parametric Study Of Supersonic Nozzle For Base Pressure Control Using Experimental And Optimization Method.
Master Completed 2021 Main Supervisor
A Comparative Study Of Natural Gas And Biogas Combustion In A Swirling Flow Gas Turbine Combustor.
Master Completed 2020 Co-supervisor
The Numerical Simulation Of Non-Isothermal Thin Liquid Film Flow On Inclined Plane.
Master Completed 2017 Co-supervisor
Passive Control Of Base Pressure And The Flow Development In A Duct With Sudden Expansion At Sonic Mach Number.
Master In Progress Main Supervisor
Effects Of High Entropy Alloy Energetic Additives On Nozzle Throat Erosion In Hybrid Rocket Motor.
Master In Progress Co-supervisor


Research Projects


Completed
2017 - 2020 Nonlinear Fluid Structure Interaction and Control of Lifting Surface and Body
2017 - 2019 Active Control of Base Flows and the control Effectiveness
On-Going
2023 - Present STEM Education Awareness Program for Tahfiz Students: Enhancing Scientific Literacy


Publications


Article

2024 Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197 () pp. 1-12
2024 Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6) pp. 6709-6718
2024 Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56 () pp. 1-20
2024 Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295 () pp. 1-21
2024 Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2) pp. 32-49
2024 Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2) pp. 106-117
2024 The influence of plate fin heat sink orientation under natural convection on thermal performance: an experimental and numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2) pp. 118-129
2023 Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1) pp. 243-254
2023 Analytical and numerical simulation of surface pressure of an oscillating wedge at hypersonic Mach numbers and application of Taguchi's method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1) pp. 15-30
2023 Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2) pp. 66-78
2023 Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle-enhanced phase change material. International Journal of Heat and Mass Transfer, 216 (124547) pp. 1-18
2023 Challenges and opportunities of Low Viscous Biofuel- a prospective review. ACS omega, () pp. 1-16
2023 Computational analysis of surface pressure distribution over a 2D wedge in the supersonic and hypersonic flow regimes. Fluid Dynamics and Materials Processing, 19 (6) pp. 1637-1653
2023 Control of base pressure at supersonic mach number in a suddenly expanded flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (1) pp. 210-225
2023 Development and assessment of a thermochemical cycle and SOFC-based hydrogen energy systems as a potential energy solution for the peak demand in a sustainable community. International Journal of Hydrogen Energy, 48 (56) pp. 1-8
2023 Effect of different modalities of facial images on ASD diagnosis using deep learning-based neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3) pp. 59-74
2023 Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated 2 through a 2-step ultrasonic-assisted stir casting process. Journal of Materials Research and Technology, 01473 (4) pp. 1-35
2023 Effectiveness of cone angle on surface pressure distribution along slant length of a cone at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (1) pp. 185-203
2023 Environmental, combustion, and performance investigation of low viscous biofuel in port fuel injection spark‑ignition engine. Journal of Thermal Analysis and Calorimetry, () pp. 1-22
2023 Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today, () pp. 1-3
2023 Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels. Case Studies in Thermal Engineering, 48 () pp. 1-11
2023 Experimental and numerical investigation of expansion corner effects on isolator performance. International Journal of Turbo & Jet Engines, Ahead of print () pp. 1-8
2023 Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2). Case Studies in Thermal Engineering, 50 () pp. 1-17
2023 Experimental studies to reduce usage of fossil fuels and improve green fuels by adopting hydrogen−ammonia−biodiesel as trinary fuel for RCCI engine. ACS omega, () pp. A-J
2023 Investigation of Nano composite heat exchanger annular Pipeline flow using CFD analysis for Crude Oil and Water Characteristics. Case Studies in Thermal Engineering, 49 () pp. 1-23
2023 Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3) pp. 2331-2352
2023 MRR and TWR study of powder mix EDM and pure EDM based on response surface methodology. Journal of Advanced Research in Applied Mechanics, 103 (1) pp. 13-26
2023 Numerical analysis of cavity-based control of base pressure variations at supersonic Mach numbers. Fluid Dynamics & Materials Processing, 23 (3) pp. 1-23
2023 Numerical investigation of turbulence models with emphasis on turbulent intensity at low Reynolds number flows. Advances in Aircraft and Spacecraft Science, 10 (4) pp. 1-13
2023 Numerical simulation of surface pressure of a wedge at supersonic Mach numbers and application of design of experiments. Journal of Advanced Research in Applied Mechanics, 101 (1) pp. 1-18
2023 Optimization of Nozzle Design for Weight Reduction using Variable Wall Thickness. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2) pp. 86-101
2023 Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3) pp. 569-577
2023 Performance and emission analysis of biodiesel blends in a low heat rejection engine with an antioxidant additive: an experimental study. ACS omega, 8 (40) pp. 36686-36699
2023 Prediction of RCCI combustion fueled with CNG and algal biodiesel to sustain efficient diesel engines using machine learning techniques. Case Studies in Thermal Engineering, (103630) pp. 1-38
2023 Response surface analysis of nozzle parameters at supersonic flow through microjets. Australian Journal of Mechanical Engineering, 21 (3) pp. 1037 -1052
2023 Simulation of energy dissipation in BLDC Motor and analysis of speedacoustic characteristics. Journal of Advanced Research in Applied Mechanics, 111 (1) pp. 38-61
2023 Speed control of wheeled mobile robot by nature-inspired social spider algorithm-based PID controller. Processes, 11 (4) pp. 1-21
2023 Transient solidification and melting numerical simulation of lauric acid PCM filled stepped solar still basin used in water desalination process. Case Studies in Thermal Engineering, 49 () pp. 1-16
2023 Zero emission /energy building heating through parabolic dish collector focused KNO3–NaNO3 and KNO3–NaNO3–NaNO2 PCM absorber: a case study. Case Studies in Thermal Engineering, 44 (102854) pp. 1-10
2022 A case study of unmanned aerial vehicle (drone) technology and its applications in the COVID-19 pandemic. Journal of Mechanical Engineering Research and Developments, 45 (2) pp. 70-77
2022 Advanced pneumatic mechanical system for water treatment application: dosing rate assessment for lime dosage. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (1) pp. 46-55
2022 Analytical and computational analysis of pressure at the nose of a 2D wedge in high-speed flow. Advances in Aircraft and Spacecraft Science, 9 (2) pp. 119-130
2022 Analytical assessment of blended fuels for pulse detonation engine performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2) pp. 1-16
2022 Base drag estimation in suddenly expanded supersonic flows using backpropagation genetic and recurrent neural networks. Journal of Aerospace Engineering, 236 (3) pp. 1-28
2022 CFD Simulation of NACA 2412 airfoil with new cavity shapes. Advances in Aircraft and Spacecraft, 9 (2) pp. 131-148
2022 CFD-based optimization of base pressure behavior on suddenly expanded flows at supersonic Mach numbers. Progress in Computational Fluid Dynamics, 22 (3) pp. 159-173
2022 Comparative study of quasi steady and unsteady damping derivatives for delta wings in hypersonic flow for half sine wave. Journal of Advanced Research in Fluid Mechanics and Thermal Science, 92 (1) pp. 1-8
2022 Computation of damping derivative of an Ogive at highspeed flow. Journal of Mechanical Engineering Research and Developments, 45 (2) pp. 151-165
2022 Computation of stiffness and damping derivatives of an Ogive in a limiting case of mach number and specific heat ratio. Fluid Dynamics & Materials Processing, 23 (3) pp. 1-19
2022 Developments in nanoparticles enhanced biofuels and solar energy in Malaysian perspective: a review of state of the art. Journal of Nanomaterials, 2022 () pp. 1-22
2022 Effect of expansion level and relief to shear layer in a suddenly expanded flow: a CFD approach. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (3) pp. 202-229
2022 Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (5) pp. 1-11
2022 Heat transfer characteristics of fullerene and titania nanotube nanofluids under agitated quench conditions. ACS Omega, 7 (51) pp. 47764-47783
2022 Impact of cavity location on base pressure at Supersonic Mach 1.8. Journal of Mechanical Engineering Research and Development, 45 (2) pp. 123-150
2022 Investigation of dual–pass inclined oscillating bed solar dryer for drying of non-parboiled paddy grains. Sustainability, 14 (9) pp. 1-13
2022 Investigation of suddenly expanded flows at subsonic Mach numbers using an artificial neural networks approach. Plos one, 17 (10) pp. 1-28
2022 Multi-disciplinary computational investigations on asymmetrical failure factors of disc brakes for various CFRP materials: a validated approach. Symmetry, 14 (8) pp. 1-45
2022 Numerical analysis of a microjet-based method for active flow control in convergent-divergent nozzles with a sudden expansion duct. Fluid Dynamics & Material Processing, Special Issue (1) pp. 1-24
2022 Numerical modelling and experimental validation of novel para winglet tape for heat transfer enhancement. Mathematics, 10 (2893) pp. 1-21
2022 On mechanical response of aluminum alloys in corrosive environment. International Journal of Integrated Engineering, 14 (1) pp. 48-56
2022 Optimization of dry sliding wear behavior of aluminum-based hybrid MMC's using experimental and DOE methods. Journal of Materials Research and Technology, 16 (1) pp. 743-763
2022 Passive control of base pressure using cavities in a sudden expansion duct: a CFD approach. Journal of Mechanical Engineering Research and Developments, 45 (3) pp. 44-70
2022 Preparation of Sb: SnO2 thin films and their effect on optoelectrical properties. Journal of Materials Science: Materials in Electronics -, 33 (9) pp. 1-12
2022 Response of active control on the flow field of the duct pressure at supersonic Mach numbers. Materials Today, 59 (1) pp. 951-958
2022 Reviews on design and development of unmanned aerial vehicle (drone) for different applications. Journal of Mechanical Engineering Research and Developments, 45 (2) pp. 53-69
2021 A comparative study of natural gas and biogas combustion in a swirling flow gas turbine combustor. Combustion Science and Technology, 193 (4) pp. 1-29
2021 A critical review of supersonic flow control for high-speed applications. Applied Sciences, 11 (6899) pp. 1-26
2021 A study on performance and emission characteristics of diesel engine using Ricinus Communis (Castor Oil) Ethyl Esters. Energies, 14 (4320) pp. 1-19
2021 Advancement of steam generation process in water tube boiler using Taguchi design of experiments. Case Studies in Thermal Engineering, 27 (101247) pp. 1-15
2021 An investigation of boat tail helmet to reduce drag. Advances in Aircraft and Spacecraft Science, 8 (3) pp. 239-250
2021 Analysis of a robot selection problem using two newly developed hybrid MCDM models of TOPSIS‐ARAS and COPRAS‐ARAS. Symmetry, 13 (8) pp. 1-35
2021 Analysis of flows and prediction of CH10 airfoil for unmanned arial vehicle wing design. Advances in Aircraft and Spacecraft Science, 8 (2) pp. 87-109
2021 Analysis of parallel flow type internally cooled membrane-based liquid desiccant dehumidifier using a neural networks approach. Science and Technology for the Built Environment, 27 (11) pp. 1-19
2021 Combustion, performance, and emission behaviors of biodiesel fueled diesel engine with the impact of Alumina Nanoparticle as an additive. Sustainability, 13 (12103) pp. 1-20
2021 Design intent of future tunnels. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2) pp. 50-63
2021 Determination of non-recrystallization temperature for niobium microalloyed steel. Materials, 14 (10) pp. 1-14
2021 Effect of cavities in suddenly expanded flow at supersonic mach number. CFD Letters, 13 (9) pp. 57-71
2021 Effect of non-conjugate and conjugate condition on heat transfer from the battery pack. Alexandria Engineering Journal, 60 () pp. 1-15
2021 Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets. Journal of Environmental Chemical Engineering, 9 (6) pp. 1-8
2021 Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material. Materials, 14 (4454) pp. 1-13
2021 Estimation of stiffness derivative for ogives at constant specific heat ratio γ = 1.666 at hypersonic mach numbers. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12 (10) pp. 316-325
2021 Experimental investigation of the effect of cross wire on the flow field of elliptic jet. International Journal of Heat and Fluid Flow, 90 (108834) pp. 1-12
2021 Experimental study on the mean flow characteristics of a supersonic multiple jet configuration. Journal of Aerospace Science & Technology, 108 (2021) pp. 1-13
2021 History and analysis of knowledge in Islamization of aerospace engineering. Karachi Islamicus, 1 (2) pp. 42-52
2021 Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. Materials Today, 47 () pp. 6147-6152
2021 Influence of tab corner geometry on supersonic jets. Aircraft Engineering and Aerospace Technology, 92 (3) pp. 1-8
2021 Internal flow dynamics and performance of pulse detonation engine with alternative fuels. Energy, 237 () pp. 1-10
2021 Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flow control using experimental and optimization methods. Meccanica, 56 (11) pp. 1-26
2021 Machine learning applications in modelling and analysis of base pressure in suddenly, expanded flows. Aerospace, 8 (318) pp. 1-23
2021 Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route. Materials, 14 (4315) pp. 1-24
2021 Modeling and computational experiment to obtain optimized neural network for battery thermal management data. Energies, 14 (7370) pp. 1-19
2021 On numerical investigation of heat transfer augmentation of flat target surface under impingement of steady air jet for varying heat flux boundary condition. Journal of Thermal Analysis and Calorimetry, () pp.
2021 Power plant energy predictions based on thermal factors using ridge and support vector regressor algorithms. Energies, 14 (7254) pp. 1-22
2021 Structural analysis of three-dimensional wings using finite element method. Aerospace Systems, 4 (3) pp. 1-22
2021 Studies on flows development in a suddenly expanded circular duct at supersonic mach numbers. International Journal of Heat and Technology, 39 (1) pp. 185-194
2021 Study of buzz phenomenon in suddenly expanded flow structure using experiments and visualization. Numerical Heat Transfer, Part B: Fundamentals An International Journal of Computation and Methodology, () pp. 1-18
2020 An investigation of effect of control jets location and blowing pressure ratio to control base pressure in suddenly expanded flows. Journal of Thermal Engineering,, 6 (2 (Special Issue 11)) pp. 15-23
2020 An investigation of three-way catalytic converter for various inlet cone angles using CFD. CFD Letters, 12 (9) pp. 76-90
2020 Analytical estimation of stability derivatives of wing with curved leading edges at hypersonic mach number. Test Engineering & Management, 83 (2) pp. 13808-13819
2020 Base and wall pressure control using cavities and ribs in suddenly expanded flows -an overview. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1) pp. 120-134
2020 CFD analysis of an automobile catalytic converter to obtain flow uniformity and to minimize pressure drop across the monolith. CFD Letters, 12 (9) pp. 116-128
2020 Comparing the effect of different turbulence models on the CFD predictions of NACA0018 airfoil aerodynamics. CFD Letters, 12 (3) pp. 1-10
2020 Computation of stability derivative for a wing for specific heat ratio= 1.66 for hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special Issue) pp. 208-218
2020 Design and development of chassis for formula student vehicle. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (10) pp. 1121-1130
2020 Determination of wall pressure flows at supersonic Mach numbers. Materials Today, 38 () pp. 2347-2352
2020 Enlarge duct length optimization for suddenly expanded flows. Advances in Aircraft and Spacecraft Science, 7 (3) pp. 203-214
2020 Estımatıon of hypersonıc unsteady and qausı-steady dampıng derıvatıves for a delta wings at large incıdence. International Journal of Advanced Science and Technology, 29 (6) pp. 6844-6863
2020 Experimental and numerical investigation of suddenly expanded flow field for supersonic Mach numbers with and without annular cavities. International Journal of Fluid Mechanics Research, 47 (4) pp. 337-356
2020 Experimental investigation on the performance of single spark ignition and twin spark ignition engine fuelled with ethanol-gasoline blends. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1) pp. 25-41
2020 Fluidization dynamics of hydrophobic nanosilica with velocity step changes. Applied Sciences, 10 (22) pp. 1-12
2020 Investigation and back-propagation modeling of base pressure at sonic and supersonic Mach numbers. Physics of Fluids, 32 (9) pp. 1-18
2020 Investigation of characteristics of spark ignition engine fuelled with ethanol-gasoline blends using Iso-octane additive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1) pp. 151-163
2020 Investigation of high-speed flow control from CD nozzle using design of experiments and CFD methods. Arabian Journal of Science and Engineering, () pp. 1-30
2020 Maximum temperature analysis in a Li-ion battery pack cooled by different fluids. Journal of Thermal Analysis and Calorimetry, 141 (6) pp. 2555-2571
2020 Numerical investigation of mathematical non-dimensional constant representing smoothness in the Nusselt profile. CFD Letters, 12 (6) pp. 16-27
2020 Numerical investigation of non-dimensional constant and empirical relation representing Nusselt profile non-uniformity. Journal of Thermophysics and Heat Transfer, 34 (1) pp. 1-15
2020 Numerical investigation of secondary peaks in Nusselt profile under water jet impingement. Journal of Thermophysics and Heat Transfer, 34 (2 (April-June)) pp. 421-428
2020 Numerical investigation of semi-empirical relation representing nusselt number under waterjet impingement. Journal of Thermophysics and Heat Transfer, 34 (3) pp. 579-590
2020 Numerical investigation of semi-empirical relation representing standard deviation in Nusselt profile due to water jet impingement. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1) pp. 42-53
2020 Numerical investigation of splitter plate effect on the bluff body using finite volume method. Materials Today: Proceedings, 38 (10.1016/j.matpr.2020.05.559) pp. 2181-2190
2020 Nusselt number analysis from a battery pack cooled by different fluids and multiple back-propagation modelling using feed-forward networks. International Journal of Thermal Science, () pp. 1-20
2020 On recirculation region length of suddenly expanded supersonic flows, using CFD and fuzzy logic. International Journal of Computational Fluid Dynamics, () pp. 1-17
2020 Optimization and analysis of maximum temperature in a battery pack affected by low to high Prandtl number coolants using response surface methodology and particle swarm optimization algorithm. Numerical Heat Transfer, Part A: Applications, () pp.
2020 Optimum spacing between grooved tubes: an experimental study. Journal of Mechanical Science and Technology, 34 (1) pp. 469-475
2020 Prediction of base pressure in a suddenly expanded flow the processes at supersonic Mach Number Regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2) pp. 499-511
2020 Prediction of base pressure in a suddenly expanded flow process at supersonic mach number regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2) pp. 499-511
2020 Regression analysis of flow parameters at high Mach numbers. Solid State Technology, 63 (6) pp. 5473-5488
2020 Response surface analysis, clustering, and random forest regression of pressure in suddenly expanded high-speed aerodynamic flows. Aerospace Science and Technology, 107 () pp. 1-30
2020 Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions. Applied Thermal Engineering, 179 () pp. 1-32
2020 Wall Pressure Measurements Beneath the Supersonic Jets in an Abruptly Augmented Nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (2) pp. 20-31
2019 A cost-effective data acquisition instrumentation for measurement of base pressure and wall pressure in suddenly expanded flow through ducts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1) pp. 112-123
2019 Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2) pp. 32-41
2019 An effect of sweep angle on roll damping derivative for a Delta wing with curved leading edges in unsteady flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (2) pp. 361-373
2019 An Investigation of RANS simulations for swirl-stabilized isothermal turbulent flow in a gas turbine burner. CFD Letters, 11 (9) pp. 14-31
2019 Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method. CFD Letters, 11 (5) pp. 61-71
2019 Analysis of damping derivatives for delta wings in hypersonic flow for curved leading edges with full sine wave. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1) pp. 5457-5466
2019 Analysis of parameters affecting thrust and base pressure in suddenly expanded flow from nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1) pp. 1-18
2019 CFD analysis of splitter plate on bluff body. CFD Lettrs, 11 (11) pp. 25-38
2019 CFD simulation with analytical and theoretical validation of different flow parameters for the wedge at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 19 (1) pp. 170-177
2019 Challenges and solutions for using liquid fuels in aviation industry. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2s2) pp. 288-290
2019 Control of CD nozzle flow using microjets at Mach 2.1. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2) pp. 631-635
2019 Control of nozzle flow using microjets at supersonic Mach Regime. International Journal of Engineering, 32 (7) pp. 991-998
2019 Damping derivative evaluation in pitch for an ogive at high mach numbers. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12) pp. 1307-1317
2019 Effect of area ratio on base pressure and control effectiveness. International Journal of Recent Technology and Engineering, 8 (2S3) pp. 953-958
2019 Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2) pp. 209-220
2019 Effect of micro jet control on the flow filed of the duct at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8) pp. 1758-1762
2019 Effect of nozzle pressure ratio and control jets location to control base pressure in suddenly expanded flows. Journal of Applied Fluid Mechanics, 12 (4) pp. 1127-1135
2019 Effect of sweep angle and a half sine wave on roll damping derivative of a Delta Wing. International Journal of Recent Technology and Engineering, 8 (2S3) pp. 984-989
2019 Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2) pp. 636-640
2019 Estimation of damping derivatives for delta wings in hypersonic flow for straight leading edge. International Journal of Mechanical and Production Engineering Research and Development, 9 (5) pp. 255-264
2019 Estimation of stiffness derivative of an ogive for specific heat ratio 1.666. Test Engineering and Management, 81 (11-12) pp. 5091-5100
2019 Evaluation of stiffness derivative for a delta wing with straight leading edges in unsteady flow. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S) pp. 754-762
2019 Experiment on of nozzle flow with sudden expansion at Mach 1.1. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8) pp. 1769-1775
2019 Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings. Advances in Materials Research, 8 (4) pp. 275-293
2019 Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3) pp. 1000-1003
2019 Experimental research on flow development and control effectiveness in the duct at high speed. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8) pp. 1763-1768
2019 Experimental research on wall pressure distribution in C-D nozzle at Mach number 1.1 for area ratio 3.24. International Journal of Recent Technology and Engineering, 8 (2S3) pp. 971-975
2019 Finite element modeling and analysis of a debonded smart beam in actuation. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 258-263
2019 Grooved cavity as a passive controller behind backward facing step. International Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2) pp. 185-193
2019 Hydrocarbons as alternative refrigerants in domestic refrigerators. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3) pp. 496-501
2019 Influence of control mechanism on the flow field of duct at Mach 1.2 for area ratio 2.56. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4) pp. 1135-1138
2019 Influence of expansion level on base pressure and reattachment length. CFD Letters, 11 (5) pp. 22-36
2019 Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering, 19 (1) pp. 70-82
2019 Inspection of supersonic flows in a CD nozzle using experimental method. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3) pp. 996-999
2019 Investigation of base pressure variations in internal and external suddenly expanded flows using CFD analysis. CFD Letters, 11 (4) pp. 32-40
2019 Investigation of the effects of nozzle exit mach number and nozzle pressure ratio on axisymmetric flow through suddenly expanded nozzles. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3) pp. 570-578
2019 Modeling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1) pp. 34-51
2019 Modeling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1) pp. 6820-6828
2019 Modelling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1) pp. 34-51
2019 Modelling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology, 9 (1) pp. 6820-6828
2019 Modelling of a three-shaft high-bypass-ratio engine performance and emission prediction using hydrogen fuels. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3) pp. 484-490
2019 Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5) pp. 37-49
2019 Numerical investigation of nondimensional constant and empirical relation representing nusselt profile nonuniformity. Journal of Thermophysics and Heat Transfer, 34 (1) pp. 215-229
2019 Numerical investigation of semiempirical relations representing the local Nusselt number magnitude of a pin fin heat sink. Heat Transfer—Asian Research, 48 (5) pp. 1857-1888
2019 Numerical simulation of suddenly expanded flow at Mach 2.2. International journal of Engineering & Advanced Technology (IJEAT), 8 (3) pp. 457-462
2019 Numerical simulations of a CD nozzle and the influence of the duct length. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2) pp. 622-630
2019 Numerical study of heat transfer augmentation using pulse jet impinging on Pin Fin heat sink. CFD letters, 11 (3) pp. 84-91
2019 On numerical investigation of nusselt distribution profile of heat sink using lateral impingement of air jet. CFD Letters, 11 (9) pp. 59-68
2019 On numerical investigation of semi-empirical relation representing development length for a fluid flow in a closed conduit. CFD Letters, 11 (6) pp. 63-71
2019 On numerical investigation of semi-empirical relations representing local nusselt number at lower nozzle-target spacing’s. International Journal of Engineering, 32 (1) pp. 137-145
2019 Optimization of two-dimensional wedge flow field at supersonic Mach number. CFD Letters, 11 (5) pp. 80-97
2019 Research onFlows for NACA 2412 airfoil using computational Fluid dynamics method. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1) pp. 5450-5456
2019 Role of active control in increasing base pressure at Sonic Mach Number. International Journal of Recent Technology and Engineering, 8 (2S3) pp. 966-970
2019 Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids. Materials Research Express, 6 (11) pp. 1-13
2019 Simulation of effect of various distances between front and rear body on drag of a non-circular cylinder. Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1) pp. 53-65
2019 Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2) pp. 291-296
2019 Threaded spikes for bluff body base flow control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2) pp. 194-203
2018 A new approach to low-cost open-typed subsonic compressible flow wind tunnel for academic purpose. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6) pp. 383-394
2018 An investigation to control base pressure in suddenly expanded flows. International Review of Aerospace Engineering (IREASE), 11 (4) pp. 162-169
2018 Assessment of different turbulence models in simulating axisymmetric flow in suddenly expanded nozzles. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)) pp. 243-248
2018 Base pressure behaviour in a suddenly expanded duct at supersonic mach number regimes using Taguchi design of experiments. Mechanics and Mechanical Engineering, 22 (4) pp. 1077-1097
2018 Base pressure control by supersonic micro jets in a suddenly expanded nozzle. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (4) pp. 101-112
2018 Base pressure control using micro-jets in supersonic flow regimes. International Journal of Aviation, Aeronautics, and Aerospace, 5 (1) pp. 1-26
2018 CFD analysis of CD nozzle and effect of nozzle pressure ratio on pressure and velocity for suddenly expanded flows. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3) pp. 1147-1157
2018 CFD analysis of convergent-divergent nozzle flow and base pressure control using micro-JETS. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)) pp. 232-235
2018 CFD analysis of human powered submarine to minimize drag. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3) pp. 1057-1066
2018 Design & development of a gravity powered fan using gear transmission. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)) pp. 632-637
2018 Design and fabrication of unmanned arial vehicle for multi-mission tasks. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4) pp. 475-484
2018 Effect of semi vertex angle on stability derivatives for an oscillating cone for constant value of specific heat ratio. International journal of Engineering & Technology, 7 (3.29) pp. 386-390
2018 Flow control with aero-spike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3) pp. 1001-1008
2018 Flow control with aerospike behind bluff body. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (3) pp. 1001-1008
2018 Fluid-structure interactions of variable span wings in low Reynold flows. International Journal of Engineering & Technology, 7 (3.29) pp. 381-385
2018 Investigation of base flow for an axisymmetric suddenly expanded nozzle with micro JET. International Journal of Engineering & Technology, 7 (3.29 (Special issue 29)) pp. 236-242
2018 Low-cost base drag reduction technique. International Journal of Mechanical Engineering and Robotics Research (IJMERR), 7 (4) pp. 428-432
2018 Modelling of suddenly expanded flow process in supersonic Mach regime using design of experiments and response surface methodology. International Journal of Computational and Applied Mechanics, 49 (1) pp. 149-160
2018 Numerical analysis of convergent-divergent nozzle using finite element method. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (6) pp. 373-382
2018 Numerical investigation of critical range for the occurrence of secondary peaks in the Nusselt distribution curve. CFD Letters, 10 (2) pp. 1-17
2018 Optimization of area ratio and thrust in suddenly expanded flow at supersonic Mach numbers. Case Study in Thermal Engineering, 12 () pp. 696-700
2018 Passive control of base drag employing dimple in subsonic suddenly expanded flow. International Journal of Mechanical & Mechatronics Engineering, 18 (3) pp. 69-74
2018 Passive control of base drag in compressible subsonic flow using multiple cavity. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (4) pp. 39-44
2018 Study of base pressure behavior in a suddenly expanded duct at supersonic mach number regimes using statistical analysis. Journal of Applied Mathematics and Computational Mechanics, 17 (4) pp. 59-72
2018 Study of effect of flow parameters on base pressure in a suddenly expanded duct at supersonic mach number regimes using CFD and design of experiments. Journal of Applied Fluid Mechanics, 11 (2) pp. 483-496
2018 Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8) pp. 2930-2934
2018 The computation of stiffness derivative for an ogive in the hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8 (5) pp. 173-184
2017 CFD studies on triangular micro-vortex generators in flow control. IOP Conference Series: Materials Science and Engineering, 184 (1) pp. 012007-1
2017 Comparative heat transfer analysis in different mini-channel heat sinks. International Journal of Recent Research Aspects, 4 (4) pp. 41-45
2017 Computation of stiffness derivative for an unsteady delta wing with curved leading edges. International Journal of Recent Research Aspects .., 4 (4) pp. 69-72
2017 Computational and analytical investigation of aerodynamic derivatives of similitude delta wing model at hypersonic speeds. International Journal of Technology, 8 (3) pp. 366-375
2017 Estimation of stability derivative of an oscillating cone in hypersonic flow. International Journal of Recent Research Aspectsh, 4 (4) pp. 46-52
2017 Estimation of stability derivatives of a wedges at supersonic Mach numbers. International Journal of Recent Research Aspects, 4 (4) pp. 64-68
2017 Experimental investigation on the effectiveness of active control mechanism on base pressure at low supersonic mach numbers. Lecture Notes in Mechanical Engineering, PartF9 () pp. 197-209
2017 Investigation on the prominence of abrupt expansion on the base pressure of an axi-symmetric body. International Journal of Recent Research Aspects, 4 (4) pp. 59-63
2017 Predictive modeling of suddenly expanded flow process in the Supersonic Mach number regime using response surface methodology. International Journal of Recent Research Aspects, 4 (4) pp. 53-58
2016 Active control of wall pressure flow field at low supersonic Mach numbers. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 3 () pp. 90-98
2016 An investigation of base flow control by wall pressure analysis in a suddenly expansion nozzle. Journal of Scientific Research and Development, 3 (5) pp. 1-6
2016 Analysis of variation of stiffness derivative with Mach number and angle of attack for a supersonic flow. IOSR Journal of Mechanical & Civil Engineering, 12 (6) pp. 97-104
2016 CFD analysis of the supersonic nozzle flow with sudden expansion. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE ), 18 (6) pp. 5-7
2016 Control of ideally expanded and under expanded nozzle flows with micro jets. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6) pp. 83-89
2016 Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3 () pp. 76-82
2016 Control of wall pressure flow field with micro jets and control effectiveness. IOSR Journal of Machanical & Civil Engineering, 3 () pp. 99-107
2016 Effect of aspect ratio with roll moment derivative of a delta wing in supersonic flow. International Journal of Advances in Engineering Research (IJAER), 12 (1) pp. 10-15
2016 Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. International Journal of Energy, Environment, and Economics, 24 (1) pp. 99-111
2016 Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. Indian Journal of Science and Technology, 9 (34) pp. 1-4
2016 Estimation of stability derivatives in pitch for an oscillating 2-D wedge in supersonic Flow. Advances and Applications in Fluid Mechanics, 19 (4) pp. 873-882
2016 Estimation of surface pressure distribution on a delta wing with curved leading edges in hypersonic/supersonic flow. International Journal of Energy, Environment, and Economics, 24 (1) pp. 67-73
2016 Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for mach 3.0 using CFD.. International Journal of Energy, Environment, and Economics, 24 (1) pp. 87-97
2016 Experimental studies of the base flow from the nozzles with sudden expansion with micro jets. International Journal of Energy, Environment, and Economics, 24 (1) pp. 59-66
2016 Exprimental study suddenly expanded flow from correctly expanded nozzles. ARPN Journal of Engineering and Applied Sciences, 11 (16) pp. 10041-10047
2016 Pressure and its derivative with respect to piston Mach number for an oscillating cone. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE ), 18 (6) pp. 74-78
2016 Structural analysis of vee-cap sheet metal component. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE), 18 (6) pp. 79-83
2016 Supersonic flow analysis and evaluation of damping derivative. IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 18 (6) pp. 29-36
2016 Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6) pp. 1-4
2015 Combined effect of relief and level of expansion in a suddenly expanded flow. IOSR Journal , 12 (5) pp. 52-59
2015 Control of suddenly expanded flow at low supersonic Mach numbers. International Journal of Engineering Research and Applications, 5 (8) pp. 24-33
2015 Effect of angle of attack on damping derivatives of delta wing with full sine wave curved leading edge. International Journal of Emerging trends in Engineering and Development (IJETED), 5 (1) pp. 237-245
2015 Effect of aspect ratio with angle of attack of an oscillating hypersonic delta wing with straight leading edges. Mathematical Sciences International Research Journal, 4 (2) pp. 28-33
2015 Effectiveness of micro-jets at different level of expansion. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 12 (4) pp. 29-34
2015 Experimental investigation of the base flow from the nozzles with sudden expansion. International Journal of Applied Engineering Research (IJAER), 10 (92-spc) pp. 208-211
2014 Control of base pressure with micro jets for area ratio 2.4. International Review of Mechanical Engineering, 8 (1) pp. 1-10
2014 Effect of angle of attack on stiffness derivative of an oscillating supersonic delta wing with curved leading edges . IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (6vIII) pp. 12-25
2014 Effect of angle of incidence on roll damping derivatives of a delta wing. International Journal of Emerging trends in Engineering and Development (IJETED), 4 (2) pp. 343-356
2014 Effect of angle of incidence on stability derivatives of a wing. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2 (V) pp. 411-422
2014 Effect of mach number on stiffness and damping derivatives for oscillating hyersonic non-planar wedge. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2vVIII) pp. 4-11
2014 Effect of mach number on wall pressure flow field for area ratio 2.56. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2) pp. 56-64
2014 Estimation of stability derivatives for a planar wedge in the newtonian limit. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 10 (2 ) pp. 1-6
2014 Experimental investigation of flow through convergent nozzle and the influence of micro jets on the enlarged duct flow field. IPASJ International Journal of Mechanical Engineering (IIJME ), 2 (3) pp. 7-14
2014 Experimental studies on low speed converging nozzle flow with sudden expansion . International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (1) pp. 532-540
2014 Hypersonic similitude for planar wedges. International Journal of Advanced Research in Engineering and Technology (IJARET), 5 (2) pp. 16-31
2014 Influence of micro jets on wall pressure for area ratio 3.24. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (2) pp. 872-880
2014 Studies on flow from converging nozzle and the effect of nozzle pressure ratio for area ratio of 6.25 . International Journal of Engineering Science & Advanced Technology, 4 (1) pp. 49-60
2014 Studies on wall pressure flow control by micro jets for high area ratio. International Journal of Advanced Scientific and Technical Research, 4 (1) pp. 664-672
2014 Studies on wall pressure of sonic flow through the converging nozzles for different area ratios. International Journal of Emerging Trends in Science and Technology, 4 (2) pp. 125-137
2014 Supersonic similitude for oscillating non-planar wedge. IOSR Journal of Mathematics (IOSR-JM), 10 (2vVI) pp. 15-24
2014 The effect of micro jets on wall pressure for sonic under expanded flow. International Journal of Engineering Research and Application, 4 (3) pp. 32-38
2013 Active control of flow through the nozzles at sonic Mach number. International Journal of Emerging trends in Engineering and Development (IJETED), 2 (3) pp. 73-80
2013 Approximate analytical method for damage detection in free–free beam by measurement of axial vibrations. International Journal of Damage Mechanics, 22 (1) pp. 133-142
2013 Control of suddenly expanded flow for area ratio 3.61. International Journal of Advanced Scientific and Technical Research (IJAST, 6 (3) pp. 1-11
2013 Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6) pp. 1482-1488
2013 Stability derivatives of a delta wing with straight leading edge in the Newtonian limit. International Journal of Engineering Research and Application, 4 (2) pp. 1482-1488
2013 Stabilty derivatives in the newtonian limit. International Journal of Advanced Research in Engineering & Technology (IJARET), 4 (7) pp. 276-289
2013 Studies on flow from convergent nozzle with sudden expansion and control effectiveness under the influence of micro jets . International Journal of Research in Mechanical Engineering & Technology (IJRMET) , 4 (1) pp. 76-87
2012 Active control of base pressure in suddenly expanded flow for area ratio 4.84. International Journal of Engineering Science and Technology (IJEST), 4 (5) pp. 1885-1895
2012 Base pressure studies from over expanded nozzle for area ratio 2.56. International Journal of Current Research and Review, 4 (11) pp. 107-112
2012 Control of base flows with micro jet for area ratio of 6.25. ARPN Journal of Engineering and Applied Sciences, 7 (8) pp. 992-1102
2012 Control of nozzle flow in a suddenly expanded duct with micro jets. International Journal of Engineeing Science and Advance Technology (IJESAT), 2 (4) pp. 789-795
2012 Effect of area ratio on base pressure in a suddenly expanded duct for under expanded flow ft mach 1.87. International Journal of Mechanical and Industrial Engineering, 2 (2) pp. 86-90
2012 Effect of mach number in a suddenly expanded flow for area ratio 4.84. International Journal of Engineering Research and Application, 2 (4) pp. 593-599
2012 Effect on base pressure in suddenly expanded flows with variable location of microjets. International Journal of Current Research and Review (IJCRR), 4 (16) pp. 1-8
2012 Estimation of stability derivatives of a delta wing in hypersonic flow. International Journal of Emerging trends in Engineering and Development (IJETED), 6 (2) pp. 505-516
2012 Estimation of stability derivatives of an oscillating hypersonic delta wings with curved leading edges. International Journal of Mechanical Engineering & Technology, 3 (3) pp. 483-492
2012 Experimental investigations on wall pressure in suddenly enlarged ducts at supersonic Mach number regimes. International Journal of Emerging Trends in Engineering and Development (IJETED), 6 (2) pp. 496-504
2012 High incidence supersonic similitude for planar wedge. International Journal of Engineering Research and Application, 2 (5) pp. 468-471
2012 Optimum length for pin fins used in electronic cooling. Applied Mechanics and Materials, 110/16 () pp. 1885-1895
2012 Oscillating supersonic delta wing with straight leading edges. International Journal of Computational Engineering Research,, 2 (5) pp. 1226-1233
2012 Oscillating supersonic delta wings with straight leading edges. International Journal of Computational Engineering Research,, 2 (5) pp. 12028-12035
2012 Studies on suddenly expanded flow at different levels of over expansion for area ratio 3.24. International Journal of Scientific & Engineering Research, 3 (8) pp. 1-6
2012 Wall pressure studies in a suddenly expanded flow for area ratio 2.56”. International Journal of Engineering Research and Application, 2 (5) pp. 1566-1573
2011 Control of base flows with micro jets. International Journal of Turbo & Jet-Engines, 28 (1) pp. 59-69
2010 Oscillating supersonic delta wings with curved leading edges. Advanced Studies in Contemporary Mathematics, 20 (3) pp. 359-372
2008 Control of base pressure with micro jets:part-I. Aircraft Engineering and Aerospace Technology, 80 (2) pp. 158-164
2006 Active control of base pressure in supersonic regime. Journal of Aerospace Engineering, Institution of Engineers, India, 87 (5) pp. 1-8
2006 Control of suddenly expanded flow. Aircraft Engineering and Aerospace Technology, 78 (4) pp. 293-309
2006 Nozzle expansion level effect on a suddenly expanded flow. International Journal of Turbo & Jet-Engines, 23 (4) pp. 233-257
2004 Active control of suddenly expanded flow from under expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4) pp. 233-253
2004 Control of suddenly expanded flow from correctly expanded nozzles. International Journal of Turbo & Jet-Engines, 21 (4) pp. 255-278
2003 Control of suddenly expanded flows with micro-jets. International Journal of Turbo & Jet-Engines, 20 (1) pp. 63-81
2002 Active control of suddenly expanded flows from overexpanded nozzles. International Journal of Turbo & Jet-Engines, 19 (1-2) pp. 119-126
1998 Chaos in wraparound fin projectile motion. AIAA Journal, 21 (2) pp. 354-356
1990 Pitch and roll derivatives of a delta wing with curved leading edge in high speed flow. Aeronautical Society of India, 42 (4) pp. 299-302
Conference or Workshop Item

2023 Evaluation of stability derivatives of an Ogive in a Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence,
2023 Integration of IOT and control systems for industry 4.0 applications. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence,
2023 Stiffness derivative for a non-planar wedge in Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence,
2022 Experiments on wall pressure at an area ratio 4.84 in a suddenly expanded flow field at supersonic Mach numbers. In: 2nd International Conference on Advanced Research In Mechanical Engineering (2nd ICARME – 21),
2021 Benefit of Mach number and expansion level on the flow development in a cylindrical tube diameter of 18 mm. In: 2021 International Conference on Technology Innovation in Mechanical Engineering, TIME 2021,
2021 CFD analysis of compressible flows in a convergent-divergent nozzle. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME),
2021 Effect of control on the duct flow at high mach numbers. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020),
2021 Effect of expansion level on the flow development with sudden expansion at high Mach numbers. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020,
2021 Estimation of Mach numbers in supersonic jets using schlieren images. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020,
2021 Experimental study of midplane jet evolution in multiple jets at Mach 2.0. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020,
2021 Impact of expansion level on flowfield with sudden expansion at supersonic regimes. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering,
2021 Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021,
2021 Influence of microjets on flow development at supersonic mach numbers with sudden expansion. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020),
2021 Influence of microjets on flow development for diameter ratio of 1.6 for correctly expanded nozzles. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME),
2021 Investigation of flow growth in a duct flows for higher area ratio. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020),
2021 Mechanical response of aluminum 7075 with heat treatment and exfoliation corrosion. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021,
2021 Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech),
2021 Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021),
2021 Numerical investigation of splitter plate effect on the bluff body using finite volume method. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME),
2020 Automated image analysis and improvisations to manage palm oil plantation. In: 3rd Tarumanagara International Conference of the Applications of Technology and Engineering (TICATE),
2020 Position of static cylinder effect on base flows. In: 1st International Conference on Data Science, Machine Learning and Applications, 2019,
2019 A comparison of the effect of single and multiple cavities on base flows. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018,
2019 Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019),
2019 The effect of replacement of natural sand by manufactured sand on the properties of the concrete. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018,
2018 Active control of base pressure with counter clockwise rotating cylinder at Mach 2. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017,
2018 Computation of stability derivatives of an oscillating cone for specific heat ratio = 1.66. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017,
2018 Counter clockwise rotation of cylinder with variable position to control base flows. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017,
2018 Design and fabrication of flying saucer utilizing coanda effect. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017,
2018 Energy harvesting from aerodynamic instabilities: Current prospect and future trends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 Estimation of stability derivatives in newtonian limit for oscillating cone. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017,
2018 Experimental investigation of the base flow and base pressure of sudden expansion nozzle. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17),
2018 Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow. In: 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018,
2018 Optimization of heat transfer on thermal barrier coated gas turbine blade. In: 1st International Conference on Aerospace and Mechanical Engineering, AeroMech 2017,
2018 Passive control of base pressure with static cylinder at supersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017),
2018 Stability derivatives of a oscillating wedges in viscous hypersonic flow. In: 1st International Conference on Aerospace and Mechanical Engineering (AeroMech 2017),
2017 CFD analysis of effect of area ratio on suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT),
2017 CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle. In: 2017 2nd International Conference for Convergence in Technology (I2CT),
2017 CFD analysis of effect of Mach number, area ratio and nozzle pressure ratio on velocity for suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT),
2017 Dynamic stability of unguided projectile with 6- DOF trajectory modeling. In: 2017 2nd International Conference for Convergence in Technology (I2CT),
2017 Estimation of stability derivatives in pitch for an oscillating wedge in hypersonic flow. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Investigation of effect of process parameters on suddenly expanded flows through an axi-symmetric nozzle for different Mach numbers using design of experiments. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2016 Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. In: International Conference on Energy Systems and Developments (ICESD2016),
2016 Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation,
2016 Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for Mach 3.0 using CFD. In: International Conference on Energy Systems and Developments (ICESD2016),
2016 Experimental study of suddenly expanded flow from correctly expanded nozzles. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation,
2015 Combined effect of nozzle pressure ratio and screech prone supersonic mach number in a suddenly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015,
2015 Effect of level of expansion and inertia level in a suddenly expanded flow. In: International Conference on Mechanical Engineering & Advanced Material (ICME-AM2015),
2015 Influence of low length-to-diameter ratio and nozzle pressure ratio in an abruptly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015,
2000 Active control of suddenly expanded flow. In: 22nd International Symposium on Space Technology and Science (iSTS),
Book Section

2024 Control of suddenly expanded flow with cavity at sonic Mach number. In: Springer, ISBN: 978-981-99-7212-8, pp. 1-425
2024 Control of suddenly expanded flow with cavity at sonic Mach number. In: Springer, ISBN: 978-981-99-7212-8, pp. 1-425