الكليات

الكليات

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Waleed Fekry Faris
Professor

Print CV Email Me

Staff Detail


Professor Waleed Fekry Faris is a Professor in the Department of Mechanical Engineering, International Islamic University Malaysia (IIUM). He got his BSc and MSc in Mechanical Engineering from Zagazig University, Egypt. His Ph.D in non-linear systems was from Virginia Tech, USA. Prof. Faris is a well-known internationally in the fields of dynamics and control and also in vehicle dynamics. He is a reviewer for major international journals in the above fields, and a committee member in most of the well-established conferences in the above fields. He is on the editorial board for four internat ... show more

  • Ph.D in Non-linear Dynamics - Doctor of Philosophy, Virginia Tech. University
  • Master in Applied Computational Mechanics - Masters Degree, Zagazig University
  • Bachelor in Mechanical Engineering - Bachelor Degree, Zagazig University
  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Mechanical Control -
ACOUSTICS AND NOISE CONTROL 2009/2010 2010/2011 2012/2013 2013/2014
ADVANCED VEHICLE DYNAMICS 2006/2007 2008/2009 2011/2012 2012/2013 2014/2015
ADVANCED VIBRATION 2009/2010 2011/2012
AEROELASTICITY 2006/2007
AUTOMOTIVE CONTROL SYSTEM 2011/2012 2014/2015 2015/2016
AUTOMOTIVE CONTROL SYSTEMS 2018/2019
AUTOMOTIVE INTEGRATED DESIGN 2019/2020
AUTOMOTIVE STYLING METHODOLOGIES 2004/2005 2005/2006 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019
Acoustics and Noise Control 2018/2019 2019/2020
CONTROL SYSTEMS 2004/2005 2005/2006 2006/2007 2009/2010
CONTROL SYSTEMS (LAB) 2004/2005
DESIGN OF AUTOMOTIVE TRANSMISSION SYSTEMS 2016/2017
DYNAMICS 2004/2005
FLIGHT DYNAMICS AND CONTROL 2006/2007
HALAQAH 1 (BR) 2005/2006
HALAQAH 1 (BROTHER) 2006/2007
HALAQAH 2 (BR) 2005/2006
HALAQAH 2 (BROTHER) 2005/2006
INTERNAL COMBUSTION ENGINE 2006/2007
KINEMATICS AND DYNAMICS OF MACHINERY 2007/2008 2010/2011
MECHANICAL VIBRATIONS 2015/2016
MODELING AND SIMULATION 2007/2008
POWER TRAIN SYSTEMS 2004/2005 2005/2006 2006/2007 2007/2008 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2016/2017 2017/2018
PROJECT II 2018/2019 2019/2020
RELIABILITY ENGINEERING FOR AUTOMOTIVE APPLIC 2011/2012 2012/2013
SMART STRUCTURES 2012/2013 2013/2014 2015/2016
SPECIAL TOPIC IN AUTOMOTIVE ENGINEERING I 2006/2007
SPECIAL TOPICS IN MECHANICAL ENGINEERING 2010/2011 2018/2019
STRUCTURAL DYNAMICS 2013/2014 2014/2015
TECHNOLOGY MANAGEMENT 2007/2008
VEHICLE DYNAMICS 2008/2009 2009/2010 2010/2011 2011/2012
VEHICLE DYNAMICS & SIMULATIONS 2004/2005 2005/2006 2006/2007 2007/2008 2008/2009
VIBRATION AND AEROLASTICITY 2006/2007
In Progress
2018 - Present Construction of Moral Values Education Course Module for Pre-Service Teachers
2017 - Present Constructing and Validating An Islamic Spiritual Enhancement Module For Mental Health In Psychology Stress ( International Institute of Islamic Thought (IIIT) )
2017 - Present Constructing and Validating An Islamic Spiritual Enhancement Module For Mental Health In Psychology Stress
2017 - Present Dynamic Modeling, Navigation and Control of Micro Aerial Vehicles
2009 - Present Operations and Quality Management
Completed
2017 - 2019 Dynamic Modeling, Navigation and Control of Micro Aerial Vehicles
2012 - 2012 Problems Encountered by Scholarships Students on Scholarship Schemes in both the Islamic University Madinah (KSA) and International Islamic University Malaysia: A Comparative Study
2012 - 2016 Vibration Isolation Method using Variable Stiffness and Friction Damping
2011 - 2012 Systematic Study of University Quality System
2009 - 2013 Design and Development of the Mechanical System for Golleq
2009 - 2011 Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV)
2009 - 2011 Modeling and Stimulation for Engineers
2009 - 2011 An Investigation of the Mechanical Behaviour of MEMS-based Microswitch under Thermal and Electrostatic Loading including Cyrogenic Effect
2009 - 2009 Machine Element Design for Engineers
2009 - 2011 Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System
2008 - 2014 Humanized Industrial Design of a Handphone.
2008 - 2009 Intelligent Controller of Flexible Manipulator
2008 - 2012 Vibro-Acoustic Analysis of Automotive Vehicles
2007 - 2012 Total Vehicle Dynamics Analysis
2007 - 2012 Simulation and Device Modeling of Poly-Si Thin Film Solar Cells
2006 - 2011 Influence of Different Methods of Slaughtering on the Release and/or Retention of Neurotransmitter and Other Biomolecules at Neuromascular Junction
2005 - 2008 Modeling and Analysis of Fluid/Structure Interaction in Micropumps
2004 - 2007 Nonlinear Modeling and Analysis of Mems-Based Diaphragm Devices
Article
2019 Computational validation of magnetorheological elastomers for engine mount application. International Journal of Recent Technology and Engineering , 7 (6S) pp.180-184
2019 Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems , 26 (2) pp.188-224
2018 Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology , 7 (4.13 (Special issue 13)) pp.81-85
2018 Automotive seat fit parameters based on representative Nigerian anthropometric data. Malaysian Journal of Public Health Medicine , 18 (Special Issue 2) pp.32-40
2018 All-pass filtered x least mean square algorithm for narrowband active noise control. Applied Acoustics , 142 pp.1-10
2018 Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering , 5 (Specialissue 4) pp.68-88
2017 The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah , 22 (1) pp.29-64
2017 Validated analytical modelling of supercharging centrifugal compressors with vaneless diffusers for H2-biodiesel dual-fuel engines with cooled EGR. International Journal of Hydrogen Energy , 42 (43) pp.26771-26786
2016 The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology , 30 (1) pp.77-87
2016 Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE) , 18 (6) pp.1-4
2016 Experimentally validated analytical modeling of diesel engine power and in-cylinder gas speed dynamics. Journal of Mechanical Science and Technology , 30 (10) pp.4725-4734
2016 Fuel efficient intelligent control of heavy trucks. ARPN Journal of Engineering and Applied Sciences , 11 (6) pp.4164-4171
2016 A mixed control system for active suspension for off-road vehicles. International Journal of Vehicle Noise and Vibration , 12 (2) pp.101-137
2016 Characterization of magnetorheological elastomer (MRE) engine mounts. Materials Today: Proceedings , 3 (2) pp.411-418
2016 Validated analytical modeling of diesel engine regulated exhaust CO emission rate. Advances in Mechanical Engineering , 8 (6) pp.1-15
2015 Dynamic characterization of vehicle structural panels. International Journal of Vehicle Noise and Vibration , 11 (3/4) pp.199-209
2015 Evaluation of elastomeric models for engine mountings applications . International Journal of Vehicle Noise and Vibration , 11 (3/4) pp.210-224
2015 Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration , 11 (3-4) pp.199-209
2015 Ride comfort performance of a vehicle using active suspension system with active disturbance rejection control . International Journal of Vehicle Noise and Vibration , 11 (1) pp.78-101
2014 Impact of intelligent transportation systems on vehicle fuel consumption and emission modeling: an overview. SAE International Journal of Materials and Manufacturing , 7 (1) pp.129-146
2014 Scientific research dilemma in contemporary Muslim world. International Journal of Muslim Unity , 12 (1&2) pp.1-12
2014 Dynamic characterisation of car door and hood panels using FEA and EMA. Applied Mechanics and Materials , 471 pp.89-96
2014 Supercharged diesel powertrain intake manifold analytical model. International Journal of Vehicle Systems Modelling and Testing , 9 (1) pp.1-35
2014 Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials , 471 pp.89-96
2014 A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS) , 21 (1) pp.26-41
2014 Optimisation and control of semi-active suspension using genetic algorithm for off-road full vehicle. International Journal of Vehicle Systems Modelling and Testing , 9 (3/4) pp.372-382
2014 Experimentally validated analytical modeling of diesel exhaust HC emission rate. Journal of Mechanical Science and Technology , 28 (10) pp.4139-4149
2013 Digital implementation of space vector pulse width modulation technique using 8-bit microcontroller . World Applied Sciences Journal , 21 (1) pp.21-28
2013 Air pollution study of vehicles emission in high volume traffic: Selangor, Malaysia as a case study. WSEAS Transactions on Systems , 12 (2) pp.67-84
2012 Investigation of the perfomance of a rotor-bearing systems containig composite and non-composite squeeze film dampers. Materials and Design , 34 pp.340-345
2012 "وسائل التربية فى رسائل النور "رؤية في توحيد المفاهيم . International Journal of Muslim Unity , 10 (1-2) pp.47-83
2012 مقابلة مع الدكتور عبد العزيز التويجري: الأمين العام للمنظمة الإسلامية للتربية والعلوم والثقافة (الإيسيسكو . International Journal of Muslim Unity , 10 (1-2) pp.83-95
2012 Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate. International Journal of Vehicle Noise and Vibration , 8 (4) pp.302-317
2012 Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences , 6 (1) pp.17-21
2012 Comparative analysis of LQR and robust controller for active suspension. International Journal of Vehicle Noise and Vibration , 8 (4) pp.367-386
2012 Contact-impact problems using a quasi-linear finite element appraoch. Australian Journal of Basic and Applied Sciences , 6 (1) pp.17-21
2012 Micropump modeling: current status and challenges. Australian Journal of Basic and Applied Sciences , 6 (1) pp.134-142
2012 Vibration investigation of a quarter car with nonlinear shock absorber model. Advanced Materials Research , 576 pp.665-668
2011 Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V. Journal of Manufacturing Science and Engineering , 133 (1) pp.011013-1
2011 Active engine mounting controller design using linear quadratic regulator and proportional integral derivative . International Journal of Automation and Control , 5 (3) pp.284-297
2011 Vibrational characteristics of piping system in air conditioning outdoor unit . Science China Technological Sciences , 54 (5) pp.1154-1168
2011 Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4) pp.219-231
2011 Review on solution methods for random vibration problems. Australian Journal of Basic and Applied Sciences , 5 (6) pp.355-359
2011 Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research , 264-26 pp.1174-1179
2011 Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research , 264/65 pp.1160-1165
2011 A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration , 7 (3) pp.271-284
2011 Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences , 54 (5) pp.1154-1168
2011 Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4) pp.318-392
2011 The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4) pp.307-317
2011 Air supply system transient model for proton exchange membrane fuel cell . International Journal of Vehicle systems Modelling and Testing , 6 (3/4) pp.396-407
2011 A new concept design of a motorbike with 3D model for the Malaysian market. Journal of Design Research , 9 (1) pp.16-43
2011 Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials , 84-85 pp.557-561
2011 Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials , 84-85 pp.392-395
2011 Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences , 5 (6) pp.456-460
2010 Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing , 5 (1) pp.59-71
2010 A critical evaluation on the effectiveness of ISO 9001:2000 (QMS) implementation in Malaysian and Saudi manufacturing companies. International Journal of Arab Culture, Management and Sustainable Development , 1 (3) pp.302-324
2010 Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research , 83-86 pp.637-645
2010 Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research , 97-101 pp.1989-1992
2010 An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration , 6 (2-4) pp.200-214
2010 Assessment of different semi-active control strategies on the performance of off-road vehicle suspension systems. International Journal of Vehicle Systems Modelling and Testing , 5 (2-3) pp.254-271
2010 Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1) pp.193-200
2010 Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing , 5 (1) pp.59-71
2010 A study of annular plate buckling problem with tension loaded at inner edge. Analele Universitatii 'Eftimie Murgu' , 17 (1) pp.97-103
2010 Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1) pp.193-200
2010 Dynamic characterisation of elastomeric engine mounts of different geometry used in automotive industry: simulation approach. International Journal of Vehicle Noise and Vibration , 6 (1) pp.1-39
2010 Modelling manufacturing process using a modified IDEF0 framework a case study of a car door manufacturing plant. International Journal of Engineering Systems Modelling and Simulation , 2 (4) pp.234-241
2010 The teaching of ethics at KOE, IIUM. Eubios Journal of Asian and International Bioethics , 20 (6 SupB) pp.256
2010 Teaching engineering ethics: a necessary measure for engineering capacity building in Arab countries. International Journal of Arab Culture, Management and Sustainable Development , 1 (4) pp.318-325
2010 An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration , 6 (2/3/4) pp.200-214
2010 Development of a mathematical model for the prediction of chip formation instability and its verification by fuzzy logic with genetic algorithm. International Journal of Machining and Machinability of Materials (IJMMM) , 8 (1/2) pp.38-54
2009 Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control , 6 (1) pp.62-71
2009 Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation , 1 (4) pp.231-241
2009 Analysis of semi-active suspension systems for four-axles off-road vehicle using half model. International Journal of Vehicle Noise and Vibration , 5 (1/2) pp.91-115
2009 A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration , 5 (1/2) pp.116-140
2009 Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration , 2009 (508076) pp.1-10
2009 Artificial neural network chip serration frequency model in end milling of medium carbon steel. Research Journal of Applied Sciences , 4 (3) pp.108-112
2009 Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII , 1 pp.89-96
2009 Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering , 40 (2) pp.95-103
2009 Investigation into noise problems in vehicle structure using vibro-acoustic approach. International Journal of Vehicle Noise and Vibration , 5 (3) pp.238-260
2009 A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration , 5 (1/2) pp.116-140
2009 Technology transfer: challenges and prospective Arab world as a case study. International Journal of Arab Culture, Management and Sustainable Development , 1 (2) pp.195-207
2009 Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration , 5 (1/2) pp.91-115
2009 Active engine mounting control algorithm using neural network . Shock and Vibration , 16 pp.417-437
2009 Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration , 16 pp.593-605
2009 Energy minimization approach for a two-link flexible manipulator . Journal of Vibration and Control , 15 (4) pp.497-526
2009 Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design , 30 pp.3206-3216
2008 Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology pp.1-17
2008 Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel. Journal of Engineering , 6 (3) pp.171-178
2008 Active engine mounting controller using extended minimal resource allocating networks . International Journal of Vehicle Noise and Vibration , 4 (2) pp.150-168
2008 Analysis of control policies and dynamic response of a Q-car 2-DOF semi active system . Shock and Vibration , 15 (5) pp.573-582
2007 Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration , 3 (4) pp.370-405
2006 An experimental study on steel and Teflon squeeze film dampers . Shock and Vibration , 13 (1) pp.33-40
2006 Image processing for chatter identification in machining processes. International Journal of Advanced Manufacturing Technology , 31 pp.443-449

Conference or Workshop Item

2019 Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018)
2019 Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018)
2019 Aerodynamics of a circular planform wing. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018)
2018 Simulation of disturbance rejection control of half-car active suspension system using ADRC with decoupling transformation. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17)
2017 An investigation into NVC characteristics of vehicle behaviour using modal analysis. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
2017 Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
2016 Internal determinants of Waqaf in non-Muslim countries . In: Fifth International Journal of Awqaf 2016
2011 The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
2011 Design of robust Hoo, fuzzy and LQR controller for active suspension of a quarter car model. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11
2011 Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
2011 Enhancement of polymerase chain reaction using graphene nano-flakes. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
2011 Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
2010 An investigation of the mechanical behavior of a microswitch beam under thermal and electrostatic loading including cryogenic effect . In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010)
2010 A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model . In: 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010
2010 A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010
2010 Artificial nose for alcohol detection. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010)
2009 Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009)
2009 Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009)
2009 Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration
2009 Ride comfort assessment in off road vehicles using passive and semi-active suspension. In: Asia pacific Conference on Defence & Security Technology (DSTC 2009)
2009 Technology transfer: Challenges and prospective Arab world as a case study. In: International Engineering Education Conference (IEEC 2009)
2008 Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008)
2008 Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference
2008 A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education
2008 Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008)
2008 Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008
2008 Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020 . In: Malaysian Metallurgical Conference, MMC 2008
2008 Analysis of semiactive suspension systems using half-car model. In: FISITA 2008 World Automotive Congress
2008 Semi-active suspension system for off-road vehicles. In: 3rd International Conference on Mechatronics, ICOM’08
2008 An assessment of semi-active suspension for passenger cars using full-car model. In: The 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME)
2007 Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07)
2007 Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007
2007 Analysis of quarter-car 2 degree-of-freedom semiactive systems. In: IASTED Asian Conference on Modelling and Simulation
2005 Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003
2004 A comparison between two solution approaches for diaphragm-based capacitive pressure microsensor. In: 2004 IEEE International Conference on Semiconductor Electronics
2002 Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference

Book

2011 Introduction to machine element design for engineers. IIUM Press . ISBN 9789675272936
2009 Fundamentals of fluid mechanics. IIUM Press . ISBN 9789833855889
2009 A first course in control systems. IIUM Press . ISBN 9789833855650

Book Section

2013 Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM: The Premier Global Islamic University IIUM Press . ISBN 9789674182700 , pp.239-249
2011 Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.591-596
2011 Design and production of carbon nanotube-based biosensor . In: Current research and developments in biotechnology engineering at IIUM IIUM Press . ISBN 9789674181369 , pp.130-137
2011 Use and abuse of technology : Internet as a case study. In: Islamization, Ethics and values in Science and Technology IIUM Press . ISBN 978-967-0225-82-1 , pp.143-156
2011 The contribution of Ibn al-Awwam in botany and agriculture. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press . ISBN 978-967-418-4 , pp.41-44
2011 Nasir al-Din al-Tusi's understanding of trigonometry. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies IIUM Press . ISBN 978-967-418-157-4 , pp.58-64
2011 Al-Majusi: the pioner in obstetrics. In: Contributions of Muslim Scientists to Medicine and Related Sciences IIUM Press , pp.7-11
2011 The nano world of Munir Nahfey. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies IIUM Press . ISBN 978-967-418-157-4 , pp.127-134
2011 Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: Islamization, Ethics and Values in Science and Technology IIUM Press . ISBN 9789670225821 , pp.46-54
2011 Muslim contributions to physics. In: Islamization, Ethics and Values in Science and Technology IIUM Press . ISBN 9789670225821 , pp.100-110
2011 E-waste : problems, Islamic perspective and solutions. In: Islamization, Ethics and Values in Science and Technology IIUM Press . ISBN 9789670225821 , pp.112-124
2011 Neural network controlled of an active engine mounting system using a nonlinear electromagnetic. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.194-202
2011 Semi-active suspension system for off-road vehicles. In: Mechatronics book series: selected papers from ICOM '01, ICOM '05, and ICOM '08 IIUM Press . ISBN 9789670225685 , pp.119-128
2011 Design and implementation of fuzzy control for two link flexible manipulator. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.209-214
2009 Nonlinear modeling and analysis of mems-based diaphragm devices. In: Proceedings of the Seminar on Research Findings 2008 IIUM Press . ISBN 9789833855780 , pp.360-371
2006 Muslim scientists and world civilizations. In: Islamic Engineering Ethics : Foundation Integration and Practice Future Text Publications . ISBN 983-3004-66-0 , pp.18-26
2006 Ethical challenges of informatin technology : an Islamic perspective. In: Islamic Engineering Ethics : Foundation Integration and Practice Future Text Publications . ISBN 983-3004-66-0 , pp.81-89