Staff Directory


Hanan Bt. Mokhtar

Academic Qualification

  • Mechanical Engineering - Doctor of Philosophy, University De Bourgogne
  • Master of Mechanical Engineering - Masters Degree, Universiti Tenaga Nasional (UNITEN)
  • Bachelor of Mechanical Engineering - Bachelor Degree, Universiti Tenaga Nasional (UNITEN)

Hanan Bt. Mokhtar (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

Other's position:

Head, Kulliyyah of Engineering


hananm@iium.edu.my
4475


Expert Profile


Dr. Hanan Mokhtar, a graduate of University Tenaga Nasional, Bangi, started her career as an executive (CAD/CAE) at Rexar Technologies Sdn Bhd in Damansara directly after completing her degree in April 2002. She began her career as an academician when she was appointed as an Assistant Lecturer at the International Islamic University Malaysia, Kuala Lumpur in October 2002.
She obtained the Master of Mechanical Engineering from University Tenaga Nasional in 2007 and later on in 2012, obtained her Ph.D (Mechanical Engineering) from ISAT, University of Burgundy, France, where she contributed to the study of impact damage on composite laminates, particularly the effects of hygrothermal ageing and preloading. Currently, she is an Assistant Professor at the Department of Mechanical Engineering, IIUM.


Teaching Responsibilities


AEROSPACE ENGINEERING LAB 1 2008/2009 2007/2008
AEROSPACE ENGINEERING LAB II 2016/2017 2015/2016 2014/2015 2013/2014
AUTOMOTIVE ENGINEERING LAB 1 2013/2014 2008/2009 2007/2008
AUTOMOTIVE ENGINEERING LAB II 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
AUTOMOTIVE ENGINEERING LAB III 2018/2019 2017/2018 2016/2017 2015/2016
COMPOSITE STRUCTURES 2020/2021 2018/2019
COMPOSITES STRUCTURES 2020/2021
DYNAMICS 2019/2020
ENGINEERING INDUSTRIAL TRAINING 2009/2010 2008/2009
ENGINEERING MECHANICS 2023/2024 2022/2023 2021/2022
INTEGRATED DESIGN PROJECT 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
INTEGRATED DESIGN PROJECT (IDP) 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
INTERGRATED DESIGN PROJECT 2013/2014
INTERGRATED DESIGN PROJECT (IDP) 2017/2018
MECHANICAL ENGINEERING LAB 1 2023/2024 2022/2023 2013/2014
MECHANICS OF MATERIALS 2016/2017 2015/2016 2014/2015
PROJECT I 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
SEMINAR 2008/2009 2007/2008 2006/2007
SEMINAR I 2008/2009 2007/2008
STATICS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2014/2015 2013/2014 2006/2007
STATICS (LAB) 2003/2004
VEHICLE STRUCTURAL DESIGN & MATERIALS SELECTION 2016/2017


Supervision


An Investigation On Impact Behaviour Of Palm Empty Fruit Bunch (Efb) Composites Fabricated Using Light Resin Transfer Molding (Lrtm) For Bumper Application.
Ph.D Completed 2022 Main Supervisor
Development Of Solar Structural Supercapacitor System For Ev.
Ph.D Completed 2022 Co-supervisor
Compression And Indentation Behavior Of Lightweight Foam-Filled Kraft Paper Honeycomb Structure.
Ph.D Completed 2021 Co-supervisor
Processing Parameters In Improving Purity Weight Percentage Of Local Silica Sand.
Master Completed 2024 Main Supervisor
Development Of Zno/Pva Nanocomposite For Solar Cell Application.
Master Completed 2021 Co-supervisor
Mechanical, Physical And Thermal Properties Of Natural Fibre Reinforced Epoxy Composites.
Master Completed 2021 Co-supervisor
Effect Of Stitch Parameters On Tensile And Low Velocity Impact Performance Of Empty Fruit Bunch Oil Palm Fiber Epoxy Composite.
Master Completed 2018 Main Supervisor
Assessment Of Higher Order Models For Analysis Of Laminated Composite Shells Under Thermo-Mechanical Loading.
Master In Progress Co-supervisor


Research Projects


Completed
2017 - 2023 Formulation of mechanical characteristics of palm oil fibre composite manufactured via vacuum bagging method
2016 - 2020 A New Finite Element for Analysis of Smart Laminated Circular Cylindrical Shells under Hygro-Thermo-Electric-Mechanical Loads
2014 - 2017 Investigation on the Effects of Foam-Filled Paper Honeycomb Coupled Boundary Conditions on the Compression Strength of Lightweight Sandwich Structure
2013 - 2016 Modelling of High Performance Lightweight Nanocomposite Sport Shoes During Running
2013 - 2017 A Fundamental Study of the Effect of Stitch Pattern on Mechanical Performance of Palm Fiber Composites
2011 - 2016 RU 2011: Design and Development of Vacuum Bagging (VB) Manufacturing Setup for Composite Structures Fabrication with Minimized Manufacturing Defects and Optimal Mechanical Performance
On-Going
2023 - Present STEM Education Awareness Program for Tahfiz Students: Enhancing Scientific Literacy
2022 - Present Development of Robotic Learning Kit and Modules for Robotic Competitions
2020 - Present Investigation on beneficiation of local silica sand for solar cells application
2016 - Present Application of Conditioned and Orthogonalised Reverse Path Nonlinear Methods for Identifying Structural Damage


Publications


Article

2020 Computational analysis of low velocity impacts on Empty Fruit Bunch (EFB) composite. TEST Engineering & Management, 83 (May - June 2020) pp. 1242-1247
2020 Experimental study on Empty Fruit Bunch (EFB) composite subjected to three point bending using ANOVA technique. TEST Engineering & Management, 83 (May – June 2020) pp. 1248-1255
2016 Effect of thread material and stitch orientation on tensile mechanical property of stitched oil palm empty fruit bunch fiber reinforced epoxy composites. Journal of Built Environment, Technology and Engineering, 1 () pp. 282-288
2011 The influence of ageing on the impact damage of carbon epoxy composites. Procedia Engineering, 10 () pp. 2615-2620
Conference or Workshop Item

2019 Review of manufacturing process for good quality of composite assessment. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018),
2018 Experimental study of low-velocity impact on foam-filled kraft paper honeycomb structure. In: "International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017)",
2017 A study on the parameters affecting the properties of coated paper honeycomb. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Effect of stitching on the tensile mechanical property of empty fruit bunch oil palm fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2017 Numerical analysis of kraft paper honey comb subjected to uniform compression loading. In: International Conference on Materials Physics and Mechanics 2017,
2017 Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2017 Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016,
2016 Experimental study on energy absorption of foam filled kraft paper honeycomb subjected to quasi-static uniform compression loading. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016,
2012 Comparison of single and double impact damage on carbon/epoxy laminates subjected to hygrothermal ageing. In: ECCM 15,
2012 The effect of double impact on hygrothermally aged carbon epoxy laminates. In: Diracoys 2012,
Book

2020 ROBOCON Robot Design Handbook 2020. Center for Professional Development, ISBN: 978-967-12577-8-4
2019 Robot design handbook: ROBOCON Malaysia 2019. IIUM Press, International Islamic University Malaysia, ISBN: 978-967-491-054-9